Hello from Germany and sorry for my terrible English ;)
I am new in this business, OK not really new, I was working in a RADAR
station for 13,5 years but I am new on FlightRadar & Co
I have the DVBT Dongle from Jetvision (RTl1090 based), promoted by
FlightRadar24 and I bought PlanePlotter.
I installed on my 64bit Win8.1 PC the rtl1090imu.exe and I can submit data
through fr24feed.exe to FlightRadar24, if I want to use PlanePlotter I
have to start rtl1090.exe. (or dump1090.bat) This works also fine.
But I want to submit data to FlightRadar24 (to keep my premium account
and support the community) and I want to use Planeplotter. but both
together doesn't work
the config for fr24feed.exe
receiver="dvbt"
fr24key="EDITED"
path="mr-dump1090.exe"
bs="yes"
raw="yes"
logmode="2"
In PlanePlotter --> Input/output settings
I enabled Mode-S/ADS-B --> RTL dongle > RTL1090 (127.0.0.1:30001)
this works fine with rtl1090.exe
In PlanePlotter
I enabled Mode-S/ADS-B --> RTL >PC+Dump1090 (127.0.0.1:30005)
this works fine with dump1090.bat
Maybe I need a step to step instruction to get this running
If I run the fr24feeder as second step the feeder is sending only Pings
Best Regards
Jens
I am new in this business, OK not really new, I was working in a RADAR
station for 13,5 years but I am new on FlightRadar & Co
I have the DVBT Dongle from Jetvision (RTl1090 based), promoted by
FlightRadar24 and I bought PlanePlotter.
I installed on my 64bit Win8.1 PC the rtl1090imu.exe and I can submit data
through fr24feed.exe to FlightRadar24, if I want to use PlanePlotter I
have to start rtl1090.exe. (or dump1090.bat) This works also fine.
But I want to submit data to FlightRadar24 (to keep my premium account
and support the community) and I want to use Planeplotter. but both
together doesn't work
the config for fr24feed.exe
receiver="dvbt"
fr24key="EDITED"
path="mr-dump1090.exe"
bs="yes"
raw="yes"
logmode="2"
In PlanePlotter --> Input/output settings
I enabled Mode-S/ADS-B --> RTL dongle > RTL1090 (127.0.0.1:30001)
this works fine with rtl1090.exe
In PlanePlotter
I enabled Mode-S/ADS-B --> RTL >PC+Dump1090 (127.0.0.1:30005)
this works fine with dump1090.bat
Maybe I need a step to step instruction to get this running
If I run the fr24feeder as second step the feeder is sending only Pings
Code:
if I run the fr24 feeder afterwards its sending only Pings, see the log
below:
2015-06-27 16:04:11 | [main][i]FR24 Feeder/Decoder [0x02107000]
2015-06-27 16:04:11 | [main][i]Version: 1.0.11-6/generic
2015-06-27 16:04:11 | [main][i]Built on Jan 29 2015 15:59:23
(r:284/Windows/i386)
2015-06-27 16:04:11 | [main][i]Copyright 2008-2015 (c) Piotr Pawluczuk
2015-06-27 16:04:11 | [main][i]Flightradar24 AB(http : // flightradar24 . com)
2015-06-27 16:04:11 | [w]Detected --net argument for dump1090, disabling
internal RAW feed!
2015-06-27 16:04:11 | [w]Detected --net argument for dump1090, disabling
internal BS feed!
2015-06-27 16:04:11 | [main][i]Reader 0 started
2015-06-27 16:04:11 | [time][i]Synchronizing time via NTP
2015-06-27 16:04:11 | [reader][i][0]Initializing reader
2015-06-27 16:04:11 | [reader][i][0]Connecting to Generic receiver via
(exe://mr-dump1090.exe --raw)
2015-06-27 16:04:11 | [master][i]Starting processing thread
2015-06-27 16:04:11 | [httpd][i]Server started, listening on 0.0.0.0:8754
2015-06-27 16:04:11 | [reader][i][0]Connected to the receiver,
authenticating
2015-06-27 16:04:11 | [reader][i][0]Authenticated, processing messages
2015-06-27 16:04:15 | [time][i]Time synchronized correctly, offset
+36.0238 seconds
2015-06-27 16:04:15 | [main][i]Feed Network client started
2015-06-27 16:04:15 | [feed][i]Downloading configuration
2015-06-27 16:04:15 | [feed][c]Interval: 5s
2015-06-27 16:04:15 | [feed][c]Latitude: 48.0500
2015-06-27 16:04:15 | [feed][c]Longitude: 11.1700
2015-06-27 16:04:15 | [feed][c]GND: YES
2015-06-27 16:04:15 | [feed][c]NonADSB: YES
2015-06-27 16:04:15 | [feed][c]Timestamps: optional
2015-06-27 16:04:15 | [feed][c]Max range AIR: 350.0nm
2015-06-27 16:04:15 | [feed][c]Max range GND: 100.0nm
2015-06-27 16:04:15 | [feed][i]defined 1 server
2015-06-27 16:04:15 | [feed][n]EDMO39@83.140.21.66:8099/UDP
2015-06-27 16:04:15 | [feed][n]connecting
2015-06-27 16:04:15 | [stats][i]Stats thread started
2015-06-27 16:04:16 | [feed][n]connected
2015-06-27 16:04:16 | [feed][n]switching to UDP
2015-06-27 16:04:16 | [feed][n]working
2015-06-27 16:04:46 | [feed][n]ping 1
2015-06-27 16:05:16 | [feed][n]ping 2
2015-06-27 16:05:46 | [feed][n]ping 3
2015-06-27 16:06:16 | [feed][n]ping 4Best Regards
Jens