Am stumped, need a bit of help pls

Hi all

I've tried to get my little rpi up and running and even though it is running and connecting, I can't seem to get it to report anything.

I was wondering anyone can offer some tips that I can use to see if the DVB-T is actually working correctly?

I did make a coax collineal antenna but have checked that and it gives me a nice beep when I connect to either end of the copper and nothing between the shield and copper so I think that is ok. I've also left the end piece open as I didn't have a 75 ohm resistor but I read it's ok to do that.

I'm running raspbian noobs v1.4.2 and have followed the post "Beta test new Flightradar24 MLAT software for Raspberry Pi" to install FR24Feed.

The status screen on the rpi shows it's connected via UDP with my code and a connected dvbt reciever with MLAT on.

But the aircraft tracked is 0 and uploaded is n/a.

I've googled the heck out of it and checked the forums (have also set up the blacklist file as well as per another post here) but haven't had any luck.

Looking forward to someone having a suggestion or two please.

Cheers