Hi,
My PiZero operating OK for months,
Been having problem last few days with feeds status showing offline at flightradar24.com/account/feed-stats
Understand this was due to faulty 19.2 update.
Pi has done an automatic update to 19.5...still offline.
Powered off/on.
Stuck now and don't know how to fix being a linux and fr24 numpty.
Would appreciate any help,
Interestingly, the feed status bar chart does show that it went on line for about an our earlier this morning by itself, then went offline again.
Thanks.
SSH into pi shows:-
● fr24feed.service - Flightradar24 Decoder & Feeder
Loaded: loaded (/etc/systemd/system/fr24feed.service; disabled)
Active: active (running) since Sat 2018-01-20 10:42:52 UTC; 10min ago
Process: 572 ExecStartPre=/bin/chmod a+rwx /var/log/lighttpd (code=exited, status=0/SUCCESS)
Process: 569 ExecStartPre=/bin/chown -R nobody:nogroup /run/dump1090-mutability /var/log/fr24feed /run/fr24feed /dev/shm/decoder.txt (code=exited, status=0/SUCCESS)
Process: 566 ExecStartPre=/bin/touch /dev/shm/decoder.txt (code=exited, status=0/SUCCESS)
Process: 563 ExecStartPre=/bin/mkdir -p /run/dump1090-mutability /var/log/fr24feed /run/fr24feed /var/log/lighttpd (code=exited, status=0/SUCCESS)
Process: 559 ExecStartPre=/usr/lib/fr24/install_dump1090.sh (code=exited, status=0/SUCCESS)
Main PID: 575 (fr24feed)
CGroup: /system.slice/fr24feed.service
└─575 /usr/bin/fr24feed
Flightradar24 Feeder/Decoder
Linux/generic/static_arm/1.0.19-5
Updated: 10:53:27 GMT+0000 (GMT Standard Time)
FR24 Link: Connected via UDP
FR24 Radar Code: T-EGUA13
Aircraft Tracked (ModeS & ADS-B): 0
Aircraft Uploaded: N/A
Receiver: avr-tcp, Connected
MLAT running: NO
Actions:
Settings
Restart software
Terminate software
Show tracked aircraft list
Show status variables (*)
ac_map_size="3072"
build_arch="static_arm"
build_flavour="generic"
build_os="Linux"
build_revision="T201801191038"
build_timetamp="Jan 19 2018 10:38:52"
build_version="1.0.19-5"
cfg_baudrate=""
cfg_bs="no"
cfg_host="localhost:30002"
cfg_mpx="no"
cfg_path=""
cfg_raw="no"
cfg_receiver="avr-tcp"
cfg_windowmode="0"
d11_map_size="0"
feed_alias="T-EGUA13"
feed_configured_mode="UDP"
feed_current_mode="UDP"
feed_current_server="83.140.21.87"
feed_last_attempt_time="1516445383"
feed_last_config_attempt="1516445014"
feed_last_config_info=""
feed_last_config_result="success"
feed_last_connected_time="1516445383"
feed_last_disconnected_time="1516445375"
feed_status="connected"
feed_status_message=""
fr24key="f82c75cf8ca7ad54"
last_json_utc="1516445573"
last_rx_connect_status="E1"
mlat-ok="NO"
mlat-started="YES"
mlat_problem="no-config"
msg_ring_full="0"
msg_ring_length="0"
offline-mode="no"
rx_connected="0"
shutdown="no"
time_update_utc="1516445562"
time_update_utc_s="2018-01-20 10:52:42"
timing_is_valid="1"
timing_last_drift="-0.0001"
timing_last_offset="-0.0001"
timing_last_result="success"
timing_source="NTP"
timing_time_last_attempt="1516445014"
timing_time_last_success="1516445014"
timing_time_since_last_success="1516445014"
My PiZero operating OK for months,
Been having problem last few days with feeds status showing offline at flightradar24.com/account/feed-stats
Understand this was due to faulty 19.2 update.
Pi has done an automatic update to 19.5...still offline.
Powered off/on.
Stuck now and don't know how to fix being a linux and fr24 numpty.
Would appreciate any help,
Interestingly, the feed status bar chart does show that it went on line for about an our earlier this morning by itself, then went offline again.
Thanks.
SSH into pi shows:-
● fr24feed.service - Flightradar24 Decoder & Feeder
Loaded: loaded (/etc/systemd/system/fr24feed.service; disabled)
Active: active (running) since Sat 2018-01-20 10:42:52 UTC; 10min ago
Process: 572 ExecStartPre=/bin/chmod a+rwx /var/log/lighttpd (code=exited, status=0/SUCCESS)
Process: 569 ExecStartPre=/bin/chown -R nobody:nogroup /run/dump1090-mutability /var/log/fr24feed /run/fr24feed /dev/shm/decoder.txt (code=exited, status=0/SUCCESS)
Process: 566 ExecStartPre=/bin/touch /dev/shm/decoder.txt (code=exited, status=0/SUCCESS)
Process: 563 ExecStartPre=/bin/mkdir -p /run/dump1090-mutability /var/log/fr24feed /run/fr24feed /var/log/lighttpd (code=exited, status=0/SUCCESS)
Process: 559 ExecStartPre=/usr/lib/fr24/install_dump1090.sh (code=exited, status=0/SUCCESS)
Main PID: 575 (fr24feed)
CGroup: /system.slice/fr24feed.service
└─575 /usr/bin/fr24feed
Flightradar24 Feeder/Decoder
Linux/generic/static_arm/1.0.19-5
Updated: 10:53:27 GMT+0000 (GMT Standard Time)
FR24 Link: Connected via UDP
FR24 Radar Code: T-EGUA13
Aircraft Tracked (ModeS & ADS-B): 0
Aircraft Uploaded: N/A
Receiver: avr-tcp, Connected
MLAT running: NO
Actions:
Settings
Restart software
Terminate software
Show tracked aircraft list
Show status variables (*)
ac_map_size="3072"
build_arch="static_arm"
build_flavour="generic"
build_os="Linux"
build_revision="T201801191038"
build_timetamp="Jan 19 2018 10:38:52"
build_version="1.0.19-5"
cfg_baudrate=""
cfg_bs="no"
cfg_host="localhost:30002"
cfg_mpx="no"
cfg_path=""
cfg_raw="no"
cfg_receiver="avr-tcp"
cfg_windowmode="0"
d11_map_size="0"
feed_alias="T-EGUA13"
feed_configured_mode="UDP"
feed_current_mode="UDP"
feed_current_server="83.140.21.87"
feed_last_attempt_time="1516445383"
feed_last_config_attempt="1516445014"
feed_last_config_info=""
feed_last_config_result="success"
feed_last_connected_time="1516445383"
feed_last_disconnected_time="1516445375"
feed_status="connected"
feed_status_message=""
fr24key="f82c75cf8ca7ad54"
last_json_utc="1516445573"
last_rx_connect_status="E1"
mlat-ok="NO"
mlat-started="YES"
mlat_problem="no-config"
msg_ring_full="0"
msg_ring_length="0"
offline-mode="no"
rx_connected="0"
shutdown="no"
time_update_utc="1516445562"
time_update_utc_s="2018-01-20 10:52:42"
timing_is_valid="1"
timing_last_drift="-0.0001"
timing_last_offset="-0.0001"
timing_last_result="success"
timing_source="NTP"
timing_time_last_attempt="1516445014"
timing_time_last_success="1516445014"
timing_time_since_last_success="1516445014"