Ok I was wondering if there's a way that I could possibly see the aircraft livery when using 3D mode. I've tried to track some planes on 3D mode lately and I had couldn't see the livery on none of them.
↧
Aircraft Livery when 3D Mode
↧
pi24 and reduced coverage
G'day all,
have been feeding fr24 for 4 years, via linux the box thats circa 2003, its been fine until recently, all it does is fr24, GSM stuff, and media streaming, lately its had a few problems, USB ports cant provide much current, it gets upset with the dongle and gsm unit both plugged in, so i grabbed a spare pi 3b doing nothing but collecting dust for 2 years, with little spare time at present I decided on the pi24 image, that all seems to have worked well, no problems, quick and painless, but -
Since moving the dongle onto the rpi, the coverage has been, frankly, shit.
Used to average 130 nm, not much I know, but if you saw whats grown around the antenna in past 4 years you'd be shocked it does that well :) since the move to the pi several days ago, it averages a mere 52nm, has anyone else experienced reduction in range after such an install?
Also of note:
Tried a second dongle I use with my laptop to watch TV on another pc and it averages the same.
The dongle connects by a secured 2 foot usb cable, so initially the dongle and therefor antenna connections were not (could not be) moved, just cable out of linux box and into the pi in the same rack next to it, also put usb cable on a tester and its tests fine, dongles test fine averaging 100mAh (no led) and 112mAh (dongle with led) - the same as per the ol linux box and both average 5.07v.
Due to the failing nature of and refusal to work with with GSM unit in place (which can not be removed) on the old box I'm not really able to try it back there again. nly real time I can do that is after 1am, and theres bugger all fights around here at that time of day :(
have been feeding fr24 for 4 years, via linux the box thats circa 2003, its been fine until recently, all it does is fr24, GSM stuff, and media streaming, lately its had a few problems, USB ports cant provide much current, it gets upset with the dongle and gsm unit both plugged in, so i grabbed a spare pi 3b doing nothing but collecting dust for 2 years, with little spare time at present I decided on the pi24 image, that all seems to have worked well, no problems, quick and painless, but -
Since moving the dongle onto the rpi, the coverage has been, frankly, shit.
Used to average 130 nm, not much I know, but if you saw whats grown around the antenna in past 4 years you'd be shocked it does that well :) since the move to the pi several days ago, it averages a mere 52nm, has anyone else experienced reduction in range after such an install?
Also of note:
Tried a second dongle I use with my laptop to watch TV on another pc and it averages the same.
The dongle connects by a secured 2 foot usb cable, so initially the dongle and therefor antenna connections were not (could not be) moved, just cable out of linux box and into the pi in the same rack next to it, also put usb cable on a tester and its tests fine, dongles test fine averaging 100mAh (no led) and 112mAh (dongle with led) - the same as per the ol linux box and both average 5.07v.
Due to the failing nature of and refusal to work with with GSM unit in place (which can not be removed) on the old box I'm not really able to try it back there again. nly real time I can do that is after 1am, and theres bugger all fights around here at that time of day :(
↧
↧
Список самолетов на земле
Добрый день!
Уже несколько дней, как из списка самолетов, находящихся на земле, стали пропадать самолеты. То есть сразу после посадки они отображаются, как находящиеся на земле, но через непродолжительное время (обычно, 10-20 минут) пропадают.
С чем это может быть связано? Приложение для ios.
Спасибо.
Уже несколько дней, как из списка самолетов, находящихся на земле, стали пропадать самолеты. То есть сразу после посадки они отображаются, как находящиеся на земле, но через непродолжительное время (обычно, 10-20 минут) пропадают.
С чем это может быть связано? Приложение для ios.
Спасибо.
↧
Airlnes.GA - Simulador de empresas de aviação (PT/PT-BR)
Olá amigos, boa noite.
Me chamo Fernando e administro o jogo (online, de browser) Airlines.GA:
Gostaria da autorização da moderação para postar mais informações aqui.
Me chamo Fernando e administro o jogo (online, de browser) Airlines.GA:
Gostaria da autorização da moderação para postar mais informações aqui.
↧
Duxford battle of Britain air show videos in 4k quality everything filmed
Hi everyone, at the weekend 22/23 september 2018 duxford England had a great air show so I filmed everything flying ! Saturday was wet and cloudy but ive still got good videos, Sunday was brighter and dry, enjoy which ever types of planes you want to see here https://www.youtube.com/user/AwesomeFullHDvideos/videos the red arrows on both days and the Eurofighter typhoon display both days are my favorites, there was also the F-35B, a400m, typhoons, tornados, Lancaster, spitfires etc , go enjoy them with the volume up high
Ps im putting them into a playlist so you can bookmark this link if you want to be able to go back and just view the duxford videos when ever you like https://www.youtube.com/watch?v=DWIX...16-tfvR2hDjrjX
Dave
Ps im putting them into a playlist so you can bookmark this link if you want to be able to go back and just view the duxford videos when ever you like https://www.youtube.com/watch?v=DWIX...16-tfvR2hDjrjX
Dave
↧
↧
distance from site not available
Hi,
I've just started feeding data to Flightradar24 - my dump1090 local page is not reporting the distance from a tracked aircraft from my site - for example:
Altitude: 32000 ft / 9748 m Squawk: 2140
Speed: 389 kt / 720 km/h RSSI: -34.4 dBFS
Track: 282° (West) Last seen: now
Position: 53.649°, -0.879° (1.2s)
Distance from Site: n/a
I have set my latitude and longitude in /etc/default/dump1090-mutability. My receiver seems to working ok:
sudo fr24feed-status
[ ok ] FR24 Feeder/Decoder Process: running.
[ ok ] FR24 Stats Timestamp: 2018-09-24 12:04:29.
[ ok ] FR24 Link: connected [UDP].
[ ok ] FR24 Radar: T-EGNO51.
[ ok ] FR24 Tracked AC: 125.
[ ok ] Receiver: connected (88360032 MSGS/0 SYNC).
[ ok ] FR24 MLAT: ok [UDP].
[ ok ] FR24 MLAT AC seen: 120.
and I can see data on my FR24 data sharing page.
any ideas?
thanks
Ian
I've just started feeding data to Flightradar24 - my dump1090 local page is not reporting the distance from a tracked aircraft from my site - for example:
Altitude: 32000 ft / 9748 m Squawk: 2140
Speed: 389 kt / 720 km/h RSSI: -34.4 dBFS
Track: 282° (West) Last seen: now
Position: 53.649°, -0.879° (1.2s)
Distance from Site: n/a
I have set my latitude and longitude in /etc/default/dump1090-mutability. My receiver seems to working ok:
sudo fr24feed-status
[ ok ] FR24 Feeder/Decoder Process: running.
[ ok ] FR24 Stats Timestamp: 2018-09-24 12:04:29.
[ ok ] FR24 Link: connected [UDP].
[ ok ] FR24 Radar: T-EGNO51.
[ ok ] FR24 Tracked AC: 125.
[ ok ] Receiver: connected (88360032 MSGS/0 SYNC).
[ ok ] FR24 MLAT: ok [UDP].
[ ok ] FR24 MLAT AC seen: 120.
and I can see data on my FR24 data sharing page.
any ideas?
thanks
Ian
↧
RTL-SDR not wanting to play
Evening all. I'm new here so please be gentle. :-)
For the past two days, I have been trying to get my RTL-SDR receiver to work with FR24feed. The FR24feed app tells me that the receiver is connected, but when i run a staus check in linux, I get "Reciever failed"
I know that the receiver works as wne I connect it to my cheap windows laptop, It not only works (Using SDR sharp and RTL1090) but it plots on plane spotter (locally)
I'm using a Pi 2B and the Flightradar image from the website.
Neither of the options in the drop down box on the FR24feed settings page match my receiver. Which one do I choose?
Any ideas? I've tried everything. As I said, I've been on this for two days now and it's annoying me.
The RX is working as when I run the test script, I get all the correct information returned, so the Pi is seeing the RX.
I really would appreciate your help on this.
Thanks in advance.
For the past two days, I have been trying to get my RTL-SDR receiver to work with FR24feed. The FR24feed app tells me that the receiver is connected, but when i run a staus check in linux, I get "Reciever failed"
I know that the receiver works as wne I connect it to my cheap windows laptop, It not only works (Using SDR sharp and RTL1090) but it plots on plane spotter (locally)
I'm using a Pi 2B and the Flightradar image from the website.
Neither of the options in the drop down box on the FR24feed settings page match my receiver. Which one do I choose?
Any ideas? I've tried everything. As I said, I've been on this for two days now and it's annoying me.
The RX is working as when I run the test script, I get all the correct information returned, so the Pi is seeing the RX.
I really would appreciate your help on this.
Thanks in advance.
↧
How to filter flights by speed or altitude?
How to filter flights by speed or altitude on flightradar on real-time?
How to filter flights by speed or altitude with all historical data?
How to filter flights by speed or altitude with all historical data?
↧
setup instruction, additional information suggestion fr24feed --signup
Linux releated.
the fr24feed --signup needs to have access to /etc/fr24feed.ini
but the file permissions are root:root rw-ro
Either inform the person installing to
sudo fr24feed --signup
or
change the file permissions to root:[user's group] with chmod
rrw:rw
the fr24feed --signup needs to have access to /etc/fr24feed.ini
but the file permissions are root:root rw-ro
Either inform the person installing to
sudo fr24feed --signup
or
change the file permissions to root:[user's group] with chmod
rrw:rw
↧
↧
errata in documentational & Oblivion's post
sudo fr24feed-status
if noticed several times
it should read
sudo fr24feed --status
if noticed several times
it should read
sudo fr24feed --status
↧
Radarview ESSA STAR and SID outlines
Hi there!
I have searched far and wide but couldn't find any good sources for the standard approaches and departures for Swedish airports. So I generated them myself instead from the AIP. See attached screenshot.
Does anyone know if there already are any good files available? Would anyone else be interested in having these files?
Regards,
o
fr24radarviewESSA.jpg
I have searched far and wide but couldn't find any good sources for the standard approaches and departures for Swedish airports. So I generated them myself instead from the AIP. See attached screenshot.
Does anyone know if there already are any good files available? Would anyone else be interested in having these files?
Regards,
o
fr24radarviewESSA.jpg
↧
Color VRS
Hey guys,
does anybody know how I can change color of letters in the textbox on the map in virtual radar server? I looked thru the documentation of the custom content plugin but I found nothing.
Thank.
Dan
does anybody know how I can change color of letters in the textbox on the map in virtual radar server? I looked thru the documentation of the custom content plugin but I found nothing.
Thank.
Dan
↧
Better MLAT data?
One of my pet peeves is the daft way fr24feed uses NTP (it requests time from servers in Oceania, South America, Africa, Europe, North America and Asia every eleven minutes... (I've contacted FR24 and they say they may fix it in future versions...)).
I had a lightbulb moment and as I have a GPS stratum 1 NTP server on site I've edited /etc/hosts to point all those ntp pool hosts to my local NTP server. It may be coincidence but around the same time the "mlat-last-push_count" on the monitor.txt page jumped much higher, so I guess my client is now supplying more MLAT data to FR24?
I had a lightbulb moment and as I have a GPS stratum 1 NTP server on site I've edited /etc/hosts to point all those ntp pool hosts to my local NTP server. It may be coincidence but around the same time the "mlat-last-push_count" on the monitor.txt page jumped much higher, so I guess my client is now supplying more MLAT data to FR24?
↧
↧
Secure remote access to fr24feed possible?
As the server control web access sits on port 8754 along with the server settings that can be changed to any command (scary).
Is there a way to secure this web controller port so one can safely access it outside of the LAN?
Is there a way to secure this web controller port so one can safely access it outside of the LAN?
↧
Software feels a little, lacking
I've paid for planeplotter after using VRS for a while. I feel completely underwhelmed by the product.
Is there something I am missing with features that could make me like it more? I was mostly having a terrible time with the map and moving it around and zooming.
I'm wondering if there are any decent guides to getting it configured to look a little more clean. After running it for a few days my whole screen would have be covered with the gray aircraft tracks, and they aren't even that smooth?
Is there something I am missing with features that could make me like it more? I was mostly having a terrible time with the map and moving it around and zooming.
I'm wondering if there are any decent guides to getting it configured to look a little more clean. After running it for a few days my whole screen would have be covered with the gray aircraft tracks, and they aren't even that smooth?
↧
FR24 Data Delay (~90s)
I have been comparing data received from a single ADSB source that I have to the results of Flightradar24. Going through the analysis and matching up aircraft, I have noticed there is about an 89s to 90s time offset between the two sources.
Has anyone had a similar experience to this? Or, is there any explanation for this large time offset between the two sources? I have looked through the FR24 documentation as well as on forum posts, but I am not seeing anything about FR24 delaying their data.
Any help/suggestions would be greatly appreciated.
Has anyone had a similar experience to this? Or, is there any explanation for this large time offset between the two sources? I have looked through the FR24 documentation as well as on forum posts, but I am not seeing anything about FR24 delaying their data.
Any help/suggestions would be greatly appreciated.
↧
Polar Plot Range
Folks,
Hope I've got the right section.
On my stats page it currently shows my maximum range as 76NM but the Polar Plot appears to show >200 200 100 and 50
If I hide 50,100 & 200 but show 200+ the range appears to shrink within the confines of the range polygon, If I select 200 only the coloured segments are well outside the range polygon.
Bit baffled actually.
Geffers
Hope I've got the right section.
On my stats page it currently shows my maximum range as 76NM but the Polar Plot appears to show >200 200 100 and 50
If I hide 50,100 & 200 but show 200+ the range appears to shrink within the confines of the range polygon, If I select 200 only the coloured segments are well outside the range polygon.
Bit baffled actually.
Geffers
↧
↧
Newbie question... my tracked a/c on map?
Hi everyone!
Just started my FR24 feed, trying to work my way through all information available :-)
Is there any way i can see the a/c I am tracking on a map? Using my radar ID as filter doesnt work (read the other thread about this). Status page from Pi does list the a/c, however can i see them on a map?
Just started my FR24 feed, trying to work my way through all information available :-)
Is there any way i can see the a/c I am tracking on a map? Using my radar ID as filter doesnt work (read the other thread about this). Status page from Pi does list the a/c, however can i see them on a map?
↧
Radar Filter
Folks,
Curiosity, if I filter the radar shown for my account and activate it all aircraft disappear, can reduce the map to show Europe and still no aircraft appear.
I thought that should only filter out aircraft picked up by my system.
Just experimenting with filter use to enhance my enjoyment of the mapping system.
Geffers
Curiosity, if I filter the radar shown for my account and activate it all aircraft disappear, can reduce the map to show Europe and still no aircraft appear.
I thought that should only filter out aircraft picked up by my system.
Just experimenting with filter use to enhance my enjoyment of the mapping system.
Geffers
↧
This FR24 have preferences for some radars?
I installed my own radar this week and almost always follow the aircraft he gets. However, I realized that on the site, it always shows that the radar you are capturing is from someone else.
Someone please answer me?
Someone please answer me?
↧