↧
Air France Boeing 777-328(ER) with ATC
↧
BarefootPilots Visit The Malé Air Traffic Control Tower | Maldives
http://www.youtube.com/watch?v=PjDh03oWF28
The most impressive view of the Maldives to a pilot isn't of the resort island beaches, it's the 360 degree views in the control tower of all of Ibrahim Nasir International Airport, Malé and surrounding islands.
The most impressive view of the Maldives to a pilot isn't of the resort island beaches, it's the 360 degree views in the control tower of all of Ibrahim Nasir International Airport, Malé and surrounding islands.
↧
↧
How to change lat long
Just installed the feeder on my RPI2, during configuration i entered the longitude as 122.066 instead of -122.066 (so it thinks i am somewhere in china). I can't find this setting in the config file to change it. Does anybody know how to change this data? Rerunning the config tells me I already have a feed setup.
Is this perhaps stored in the FR24 servers instead of the config files on my RPI2?
Is this perhaps stored in the FR24 servers instead of the config files on my RPI2?
↧
Antonov an-225 Mriya and military aircraft
I do not know where else I could post sightings of the aircraft more details such as military aircraft, airplanes NASA or the giant an-225 Mriya
↧
Portugalia logo
I can see that although most of the Portugalia aircrafts are identified, the logo https://en.wikipedia.org/wiki/File:Portugalia_logo.svg is not shown in the App.
Is there any reason?
Thanks
Is there any reason?
Thanks
↧
↧
SQ avoid Turkish and Iranian airspace
I can see that SQ flights to and from Europe are flying over Egypt and Saudi Arabia instead of Turkey and Iran.
↧
GNS5890 & Raspberry PI
Hi,
as I wanted to start feeding with an GNS 5890 on an Raspberry, I found some Manuals here, but they didn't succeed.
After hours I got it now running, and I want to share the solution here, in case someone needs it. :-)
I got the Manual with ADSBox and and modified fr24feed, didn't work.
Now the current fr24feed works.
My mistake was, the GNS Firmware was at 2.9, while the actual is 4.0
So first of all, update the Stick to the up2date firmware, you get them on the manufactures homepage.
(It's my first post here, so I can't post any links ;) )
Install the fr24feed package and plug in the updated GNS 5890 to ya pi.
See, if it is recognized
You should find a line including
Now add the module for the stick
(You can add the line
to the rc.local file in the etc folder, right before exit 0, so it will work on startup.
You should have now
, so we can start configuring the feeder now.
Choose the following settings during the setup process
4 - AVR Compatible (DVBT over network, etc)
2 - USB directly to this computer
/dev/ttyUSB0 (case sensitive)
2 - 115200 | microADSB
This is how it worked for me. HTH
as I wanted to start feeding with an GNS 5890 on an Raspberry, I found some Manuals here, but they didn't succeed.
After hours I got it now running, and I want to share the solution here, in case someone needs it. :-)
I got the Manual with ADSBox and and modified fr24feed, didn't work.
Now the current fr24feed works.
My mistake was, the GNS Firmware was at 2.9, while the actual is 4.0
So first of all, update the Stick to the up2date firmware, you get them on the manufactures homepage.
(It's my first post here, so I can't post any links ;) )
Install the fr24feed package and plug in the updated GNS 5890 to ya pi.
See, if it is recognized
Code:
sudo lsusbCode:
ID 04d8:f8e8 Microchip Technology, Inc.Code:
sudo modprobe usbserial vendor=0x04D8 product=0xF8E8Code:
modprobe usbserial vendor=0x04D8 product=0xF8E8You should have now
Code:
/dev/ttyUSB0Choose the following settings during the setup process
4 - AVR Compatible (DVBT over network, etc)
2 - USB directly to this computer
/dev/ttyUSB0 (case sensitive)
2 - 115200 | microADSB
This is how it worked for me. HTH
↧
FAA PPL Exam
Finishing up my PPL this month. Any pilots with suggestions for the oral/practical exam?
↧
Raspberry Pi problems
Hi,
Been trying to set up a new Raspberry Pi with FR24Feed.
Not sure where I'm going wrong, but after completion of setup and checking status I keep getting the following;
pi@raspberrypi:~$ service fr24feed status
â fr24feed.service - LSB: Flightradar24 Decoder & Feeder
Loaded: loaded (/etc/init.d/fr24feed)
Active: active (running) since Fri 2015-10-09 11:20:31 BST; 14s ago
Process: 1786 ExecStop=/etc/init.d/fr24feed stop (code=exited, status=0/SUCCESS)
Process: 1817 ExecStart=/etc/init.d/fr24feed start (code=exited, status=0/SUCCESS)
CGroup: /system.slice/fr24feed.service
ââ1834 /usr/bin/fr24feed -- --monitor-file=/dev/shm/fr24feed.txt --write-pid=/var/run/fr24feed.pid --quiet --log-base=/var/log/fr24feed --log-r...
Don't think I'm feeding any info.
any thoughts?
Many thanks
Graham
Been trying to set up a new Raspberry Pi with FR24Feed.
Not sure where I'm going wrong, but after completion of setup and checking status I keep getting the following;
pi@raspberrypi:~$ service fr24feed status
â fr24feed.service - LSB: Flightradar24 Decoder & Feeder
Loaded: loaded (/etc/init.d/fr24feed)
Active: active (running) since Fri 2015-10-09 11:20:31 BST; 14s ago
Process: 1786 ExecStop=/etc/init.d/fr24feed stop (code=exited, status=0/SUCCESS)
Process: 1817 ExecStart=/etc/init.d/fr24feed start (code=exited, status=0/SUCCESS)
CGroup: /system.slice/fr24feed.service
ââ1834 /usr/bin/fr24feed -- --monitor-file=/dev/shm/fr24feed.txt --write-pid=/var/run/fr24feed.pid --quiet --log-base=/var/log/fr24feed --log-r...
Don't think I'm feeding any info.
any thoughts?
Many thanks
Graham
↧
↧
fog at dublin airport
aircraft numbers holding around dublin building as fog hampers landing....diversions tonight i think....
↧
Background Options
Hello to the Forum! First Post!
I just completed registration for FlightRadar24 Premium.
Question 1) Are there any options for the "background" in Radar View? As an example, the "background" in the Free Version resembles a quality geo-map. Is it possible to import that "background" from Free into Premium?
Question 2) At 75 years with bad eyes, it is very difficult for me to identify an Airport in Radar View Premium. No matter how far I zoom in, the tiny font never changes. It is basically invisible to me. Of course, this problem would disappear if there was a "positive" answer to Question 1.
Thanks!
Robin
I just completed registration for FlightRadar24 Premium.
Question 1) Are there any options for the "background" in Radar View? As an example, the "background" in the Free Version resembles a quality geo-map. Is it possible to import that "background" from Free into Premium?
Question 2) At 75 years with bad eyes, it is very difficult for me to identify an Airport in Radar View Premium. No matter how far I zoom in, the tiny font never changes. It is basically invisible to me. Of course, this problem would disappear if there was a "positive" answer to Question 1.
Thanks!
Robin
↧
Flight Play Back Stopped?
So I use FR24 frequently to track certain airlines, all the sudden since the 7/8th half of this airlines tail # no longer provide playback and before they were working fine, any ideas? This is happen for all flights with out a DEST or Departure it used to show the track now it's not, yet this all appear on the radar? Ideas?
Tails
N919CA
N952CA
N567CA
N176CA
N738MA
N739MA
Basically any aircraft without a Arr or Dest, it used to the show track also for all without those.
Tails
N919CA
N952CA
N567CA
N176CA
N738MA
N739MA
Basically any aircraft without a Arr or Dest, it used to the show track also for all without those.
↧
Lat/Lon showing as N/A
Just installed f224feed on RPI. Service status looks good...
[ ok ] FR24 Feeder/Decoder Process: running.
[ ok ] FR24 Stats Timestamp: 2015-10-13 19:14:05.
[ ok ] FR24 Link: connected [UDP].
[ ok ] FR24 Radar: T-ZBTJ19.
[ ok ] FR24 Tracked AC: 13.
[ ok ] Receiver: connected (193965 MSGS/0 SYNC).
[ ok ] FR24 MLAT: ok [UDP].
[ ok ] FR24 MLAT AC seen: 12.
However the tracked aircraft list shows no position data for any aircraft...
FR24 Feeder Tracked Aircraft List
Updated: 12:23:07 GMT-0700 (PDT)
ModeS: 0D06EB Callsign: N/A
Lat: N/A
Long: N/A
Alt: 11425ft
SQW: 2062
ModeS: A1BABB Callsign: CPZ5970
Lat: N/A
Long: N/A
Alt: 9075ft
SQW: 0000
ModeS: A318EA Callsign: N/A
Lat: N/A
Long: N/A
Alt: 16550ft
SQW: 3220
ModeS: A3A8EA Callsign: OPT335
Lat: N/A
Long: N/A
Alt: 4400ft
SQW: 4615
ModeS: A49E1B Callsign: N397PM
Lat: N/A
Long: N/A
Alt: 10400ft
SQW: 0000
ModeS: A51362 Callsign: N/A
Lat: N/A
Long: N/A
Alt: 2500ft
SQW: 1200
Any ideas?
Thx
[ ok ] FR24 Feeder/Decoder Process: running.
[ ok ] FR24 Stats Timestamp: 2015-10-13 19:14:05.
[ ok ] FR24 Link: connected [UDP].
[ ok ] FR24 Radar: T-ZBTJ19.
[ ok ] FR24 Tracked AC: 13.
[ ok ] Receiver: connected (193965 MSGS/0 SYNC).
[ ok ] FR24 MLAT: ok [UDP].
[ ok ] FR24 MLAT AC seen: 12.
However the tracked aircraft list shows no position data for any aircraft...
FR24 Feeder Tracked Aircraft List
Updated: 12:23:07 GMT-0700 (PDT)
ModeS: 0D06EB Callsign: N/A
Lat: N/A
Long: N/A
Alt: 11425ft
SQW: 2062
ModeS: A1BABB Callsign: CPZ5970
Lat: N/A
Long: N/A
Alt: 9075ft
SQW: 0000
ModeS: A318EA Callsign: N/A
Lat: N/A
Long: N/A
Alt: 16550ft
SQW: 3220
ModeS: A3A8EA Callsign: OPT335
Lat: N/A
Long: N/A
Alt: 4400ft
SQW: 4615
ModeS: A49E1B Callsign: N397PM
Lat: N/A
Long: N/A
Alt: 10400ft
SQW: 0000
ModeS: A51362 Callsign: N/A
Lat: N/A
Long: N/A
Alt: 2500ft
SQW: 1200
Any ideas?
Thx
↧
↧
Tracking on FlightRadar24 - Lacking over Canada
Why is it that the free web application on Google Chrome, cannot always track a flight over Canadian airspace?
In the alternative FlightAware site, the plane is 'visible' for several hours, before it can be viewed in the FR24 site...
The specific flight I am tracking is today's ELY5/LY5 (4X-ECD). It is viewed in FA from about 10:39AM (local Israel) through the Edmonton (Alberta Canada) Center, and later through FlightAware ADS-B.
In the FR24 site it is still just a broken line showing its planned route, and it's already 1:43PM here!
__________________________________________________ ________
Correction: This occurs when I search for the flight to track...
If I can locate the flight in the map and click it, it does display both the proper details and the route it flew, but still only after hours...
In the alternative FlightAware site, the plane is 'visible' for several hours, before it can be viewed in the FR24 site...
The specific flight I am tracking is today's ELY5/LY5 (4X-ECD). It is viewed in FA from about 10:39AM (local Israel) through the Edmonton (Alberta Canada) Center, and later through FlightAware ADS-B.
In the FR24 site it is still just a broken line showing its planned route, and it's already 1:43PM here!
__________________________________________________ ________
Correction: This occurs when I search for the flight to track...
If I can locate the flight in the map and click it, it does display both the proper details and the route it flew, but still only after hours...
↧
Where is the playback facility?
Where is the playback facility located? Im using a laptop with Windows 7 but cant locate the playback facility...
Previous questions on the subject talk about playback being located on a sidebar.... other than the sidebar which is used to disclose flight information for designated aircraft I cant find one!
Thanks
Previous questions on the subject talk about playback being located on a sidebar.... other than the sidebar which is used to disclose flight information for designated aircraft I cant find one!
Thanks
↧
Air New Zealand's future fleet orders of the B773-319
I am interested to know if someone can tell me if anz has completed there orders for the Boeing 777-319. The last two aircraft delivered were ZK-OKR, ZK-OKS now active flying was there meant to be another Boeing 777-319 with rego ZK-OKT being delivered at all into the anz fleet from the Boeing company. Please let me know.
↧
FR24 BLANK MAPS on apps
Why is it that FR24.COM maps are blank when I am using the app on my apple iphone 6s I get orange a/c then yellow a/c sometimes nothing is there some glitch in the system at all.?? this was occurring on my apple Mac computer for coverage here in AKL/NZAA yet all a/c arriving go blank. Are there good ADSL coverage area in AKL or are there blank spots
↧
↧
SBS-1 via USB on W10, FR24 Feed error - authentication failed, please help
Hi all,
Any help gratefully received as I'm a bit stuck with this - I have tried googling plus reading through relevant looking threads in this forum, without success.
I am trying to feed from my SBS1 connected to my W10 PC via USB.
Basestation is working fine, as is PP but I cannot seem to figure out why I cannot get the fr24feed to work correctly - it was working fine in the previous version, which expired end of last month.
During the initial config stage, I am not sure what I should be putting when prompted for RAW data feed, Basestation datafeed and SBS/Basestation RAW data feed - I have tried various combinations of yes/no but this may or may not be connected with the authentication errors, below. I was originally thrown by the option to MLAT, to which I was answering yes, then not understanding why DVB-T was the only feeder device.....I now put no to the MLAT question.
Extract from log:-
2015-10-13 11:30:09 | [main][i]FR24 Feeder/Decoder [0x02107000]
2015-10-13 11:30:09 | [main][i]Version: 1.0.14-9/generic
2015-10-13 11:30:09 | [main][i]Built on Sep 7 2015 14:19:56 (r:284/Windows/i386)
2015-10-13 11:30:09 | [main][i]Copyright 2008-2015 (c) Piotr Pawluczuk
2015-10-13 11:30:09 | [main][i]Flightradar24 AB(removed)
2015-10-13 11:30:09 | [main][i]Reader 0 started
2015-10-13 11:30:09 | [time][i]Synchronizing time via NTP
2015-10-13 11:30:09 | [master][i]Starting processing thread
2015-10-13 11:30:09 | [reader][i][0]Initializing reader
2015-10-13 11:30:09 | [reader][i][0]Connecting to SBS1 receiver via USB (DEFAULT)
2015-10-13 11:30:09 | [httpd][i]Server started, listening on 0.0.0.0:8754
2015-10-13 11:30:09 | [reader][i][0]Connected to the receiver, authenticating
2015-10-13 11:30:13 | [time][i]Time synchronized correctly, offset +0.0006 seconds
2015-10-13 11:30:13 | [main][i]Feed Network client started
2015-10-13 11:30:13 | [feed][i]Downloading configuration
2015-10-13 11:30:14 | [feed][c]Interval: 5s
2015-10-13 11:30:14 | [feed][c]Latitude: <removed>
2015-10-13 11:30:14 | [feed][c]Longitude: <removed>
2015-10-13 11:30:14 | [feed][c]GND: YES
2015-10-13 11:30:14 | [feed][c]NonADSB: YES
2015-10-13 11:30:14 | [feed][c]Timestamps: optional
2015-10-13 11:30:14 | [feed][c]Max range AIR: 350.0nm
2015-10-13 11:30:14 | [feed][c]Max range GND: 100.0nm
2015-10-13 11:30:14 | [feed][i]defined 1 server
2015-10-13 11:30:14 | [feed][n]EGBN12@83.140.21.66:8099/UDP
2015-10-13 11:30:14 | [feed][n]connecting
2015-10-13 11:30:14 | [stats][i]Stats thread started
2015-10-13 11:30:26 | [reader][e][0]Authentication failed, please make sure the specified device is a SBSX-USB receiver
2015-10-13 11:30:26 | MSGS-OK: 0
2015-10-13 11:30:26 | MSGS-ER: 0
2015-10-13 11:30:31 | [reader][i][0]Connecting to SBS1 receiver via USB (DEFAULT)
2015-10-13 11:30:31 | [reader][i][0]Connected to the receiver, authenticating
2015-10-13 11:30:34 | [feed][n]connected via TCP
2015-10-13 11:30:34 | [feed][n]switching to UDP
2015-10-13 11:30:34 | [feed][n]working
2015-10-13 11:30:48 | [reader][e][0]Authentication failed, please make sure the specified device is a SBSX-USB receiver
2015-10-13 11:30:48 | MSGS-OK: 0
Many thanks in advance,
Paul.
Any help gratefully received as I'm a bit stuck with this - I have tried googling plus reading through relevant looking threads in this forum, without success.
I am trying to feed from my SBS1 connected to my W10 PC via USB.
Basestation is working fine, as is PP but I cannot seem to figure out why I cannot get the fr24feed to work correctly - it was working fine in the previous version, which expired end of last month.
During the initial config stage, I am not sure what I should be putting when prompted for RAW data feed, Basestation datafeed and SBS/Basestation RAW data feed - I have tried various combinations of yes/no but this may or may not be connected with the authentication errors, below. I was originally thrown by the option to MLAT, to which I was answering yes, then not understanding why DVB-T was the only feeder device.....I now put no to the MLAT question.
Extract from log:-
2015-10-13 11:30:09 | [main][i]FR24 Feeder/Decoder [0x02107000]
2015-10-13 11:30:09 | [main][i]Version: 1.0.14-9/generic
2015-10-13 11:30:09 | [main][i]Built on Sep 7 2015 14:19:56 (r:284/Windows/i386)
2015-10-13 11:30:09 | [main][i]Copyright 2008-2015 (c) Piotr Pawluczuk
2015-10-13 11:30:09 | [main][i]Flightradar24 AB(removed)
2015-10-13 11:30:09 | [main][i]Reader 0 started
2015-10-13 11:30:09 | [time][i]Synchronizing time via NTP
2015-10-13 11:30:09 | [master][i]Starting processing thread
2015-10-13 11:30:09 | [reader][i][0]Initializing reader
2015-10-13 11:30:09 | [reader][i][0]Connecting to SBS1 receiver via USB (DEFAULT)
2015-10-13 11:30:09 | [httpd][i]Server started, listening on 0.0.0.0:8754
2015-10-13 11:30:09 | [reader][i][0]Connected to the receiver, authenticating
2015-10-13 11:30:13 | [time][i]Time synchronized correctly, offset +0.0006 seconds
2015-10-13 11:30:13 | [main][i]Feed Network client started
2015-10-13 11:30:13 | [feed][i]Downloading configuration
2015-10-13 11:30:14 | [feed][c]Interval: 5s
2015-10-13 11:30:14 | [feed][c]Latitude: <removed>
2015-10-13 11:30:14 | [feed][c]Longitude: <removed>
2015-10-13 11:30:14 | [feed][c]GND: YES
2015-10-13 11:30:14 | [feed][c]NonADSB: YES
2015-10-13 11:30:14 | [feed][c]Timestamps: optional
2015-10-13 11:30:14 | [feed][c]Max range AIR: 350.0nm
2015-10-13 11:30:14 | [feed][c]Max range GND: 100.0nm
2015-10-13 11:30:14 | [feed][i]defined 1 server
2015-10-13 11:30:14 | [feed][n]EGBN12@83.140.21.66:8099/UDP
2015-10-13 11:30:14 | [feed][n]connecting
2015-10-13 11:30:14 | [stats][i]Stats thread started
2015-10-13 11:30:26 | [reader][e][0]Authentication failed, please make sure the specified device is a SBSX-USB receiver
2015-10-13 11:30:26 | MSGS-OK: 0
2015-10-13 11:30:26 | MSGS-ER: 0
2015-10-13 11:30:31 | [reader][i][0]Connecting to SBS1 receiver via USB (DEFAULT)
2015-10-13 11:30:31 | [reader][i][0]Connected to the receiver, authenticating
2015-10-13 11:30:34 | [feed][n]connected via TCP
2015-10-13 11:30:34 | [feed][n]switching to UDP
2015-10-13 11:30:34 | [feed][n]working
2015-10-13 11:30:48 | [reader][e][0]Authentication failed, please make sure the specified device is a SBSX-USB receiver
2015-10-13 11:30:48 | MSGS-OK: 0
Many thanks in advance,
Paul.
↧
Selling my Airnav radarbox at low price ! 2 hours remaining !
EDIT : Sold
↧
Finnair A350
↧