Quantcast
Channel: Flightradar24 Forum
Viewing all 5745 articles
Browse latest View live
↧

Need help with Raspberry Pi ADS B dongle

November 21, 2018, 10:49 am
$
0
0
Hello, got my new power supply today. It is 3A 24awg cable power supply. I am running flightradar24 software on raspbian stretch, not the flightradar image. My USB dongle seems to disconnect. What I also find is that it only tracks flight for the first few seconds on boot up. Here is when i plug in the dongle + errors:

Code:
[12006.577233] usb 1-1.3: new high-speed USB device number 80 using dwc_otg
[12006.718840] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=2838
[12006.718856] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12006.718865] usb 1-1.3: Product: RTL2838UHIDIR
[12006.718874] usb 1-1.3: Manufacturer: Realtek
[12006.718883] usb 1-1.3: SerialNumber: 00000001
[12006.726248] usb 1-1.3: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
[12006.785622] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[12006.785686] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design)
[12006.793717] i2c i2c-3: Added multiplexed i2c bus 4
[12006.793734] rtl2832 3-0010: Realtek RTL2832 successfully attached
[12006.793796] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[12006.794020] r820t 4-001a: creating new instance
[12006.800889] r820t 4-001a: Rafael Micro r820t successfully identified
[12006.812495] Registered IR keymap rc-empty
[12006.812663] rc rc0: Realtek RTL2832U reference design as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0
[12006.812855] input: Realtek RTL2832U reference design as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0/input28
[12006.813435] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input29
[12006.813865] rc rc0: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 0
[12006.813882] usb 1-1.3: dvb_usb_v2: schedule remote query interval to 200 msecs
[12006.827854] usb 1-1.3: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
[12007.037974] usb 1-1.3: dvb_usb_v2: rc.query() failed=-71
[12007.049471] usb 1-1.3: USB disconnect, device number 80
[12007.448711] r820t 4-001a: destroying instance
[12007.449453] dvb_usb_v2: 'Realtek RTL2832U reference design:1-1.3' successfully deinitialized and disconnected
[12007.747250] usb 1-1.3: new high-speed USB device number 81 using dwc_otg
[12008.027321] Under-voltage detected! (0x00050005)
[12012.187329] Voltage normalised (0x00000000)
[12012.927287] usb 1-1.3: device descriptor read/64, error -110
[12028.287390] usb 1-1.3: device descriptor read/64, error -110
[12028.507381] usb 1-1.3: new high-speed USB device number 82 using dwc_otg
[12033.647405] usb 1-1.3: device descriptor read/64, error -110
↧
Search

Raspberry Pi - Restart problems

November 22, 2018, 1:25 am
$
0
0
Hello,
I encountered a problem with my Raspberry Pi while trying to restart. Once I shutdown the Raspberry, or once it loses power, I am not able to start the device properly. Even after a proper shutdown, the Raspberry Pi doesn't seem to reconnect to any network. Neither wired, nor wireless are working.
In order to restart the Flightradar application, I have to re-install the Pi24 Image and reconfigure the settings, etc.
Could there be a problem with the standard fr24-raspberry-pi-latest.img? I had a second Raspberry Pi at home which I also tried, same result.

Kind regards,
Christian
↧
↧

RAF Marham Royal Navy helicopter F-35 etc on video

November 23, 2018, 4:44 pm
$
0
0
Hi all in , on 21 November I went to a freezing cold RAF Marham to film all day in 4k video quality , here is an F-35B stealth fighter returning and landing in the hover mode https://www.youtube.com/watch?v=Yd0UPEHqywE obviously play all my videos with the volume high on your speakers ( preferably watch on a pc not a phone/tablet as your pc should have better sound quality ) , I also saw Tornado fighter jets https://www.youtube.com/watch?v=_0CVUufzzjs that set off car alarms ! , Royal Navy Merlin helicopter landing at marham https://www.youtube.com/watch?v=TUkaUzv0Qxk on top of that I also filmed Eurofighter, KC-135, Awacs plane and more ! see the other videos here https://www.youtube.com/user/AwesomeFullHDvideos/videos enjoy them Dave

ps does anyone know whats going on with fr24 forum ? i got a temporary ban recently so i contacted support, who got back to me and had no idea why i was banned ? i noticed all my previous threads have dissapeared. if i did something wrong please tell me so i dont make the mistake again ! , fr24 tell people why theyre banned unless it was a system error ??
↧

gpg: keyserver receive failed: Server indicated a failure HELP!

November 23, 2018, 5:56 pm
$
0
0
Hey there-

Have a flightaware feed already running, but want to add flightradar24 to the feed. I've tried several things, but cannot seem to get this to work. Any ideas?code.txt
Attached Files
↧

100% Uptime, 100% Offline, Range = 0, Possibility to check hardware?

November 24, 2018, 8:23 am
$
0
0
Hi guys!

I am new to feeding to FR24.
I just received all my hardware and set it the last couple days.

Hardware used:

RPi 3+, DVB-T USB Dongle with small antenna, Wifi / Cable Ethernet

So the situation is the following:

If I check the status of my feed everything seems to be ok (except MLAT but this should not be a problem).
If I log into the FR24 and feeding website my uptime is 100% but I am always shown as offline.
Also the range of my antenna shows 0 nm in all directions even though it has a good position outside on my balcony.
Here are not that many planes flying but at least some of them I should be able to track.
Unfortunately my counter of tracked planes is 0 over the last 3 days.

I contacted the support of FR24 and this was the answer:

"Check the log file please. You can use this command to do that: tail -f /var/log/fr24feed/fr24feed.log

If you see only pings, it would mean the antenna is not receiving any signal. Try placing your antenna in a better spot."

When I try the command there are only Pings as described and I tried to rearange the antenna but nothing changes.


So now the most important question:

Is there any way to find out if my hardware is propper working how it is installed and should the data on FR24 not at least show some nautical miles as a range of my antenna?

I also tried to reinstall the image of my Pi but nothing at all changes.

Please let me know which additional infomation you may Need to find out what is wrong here because I am kind of out of ideas!

Thanks a lot in advance.

Best regards
Strongjones
↧
↧

Which Hardware?

November 24, 2018, 1:09 pm
$
0
0
Hi,

I am not new to FR24, but new to feed coverage.
I saw that FR24 offers a box which is already set up and this comes for free. Otherwise I need to buy a rPi3 (which I already have) a DVT-B Stick.

Which are the differences?
↧

Both stations not working

November 15, 2018, 2:34 pm
$
0
0
I have two Stations both with FR24 and DUMP1090.
Al of a sudden they don't won't to upload to FR24 even after reboot.
Nothing has changed and works on FA and other sites.
↧

How do you connect Base Station to the fr24 feeder?

November 27, 2018, 12:35 am
$
0
0
Hi everyone,

As the title says, is there a way to connect Base Station to the fr24 feeder?
I'm kind of new to this Base Station application and do not know if I configured it properly. I don't even know what SBS is. I just know it is related to Base Station.
I am not a total newbie to these kinds of things though. I have used many other ads-b decoding software and such.

So my receiver is a DVB-T/SDR dongle which is used by the fr24 feeder to share data.
My settings for the feeder (as found on the localhost html) are:
Receiver: DVBT Stick (default)
Host/IP: localhost:30002
COM/DEV/PATH: mr-dump1090.exe
Process arguments: --net
Baudrate: default (I tried setting this to "921600 SBS1/1er/3" but no aircraft is shown on Base Station)
RAW data (30002/30334): NO
SBS Feed (10001): YES (This was set to NO before and I tried setting it to YES and set the Base Station network address to 127.0.0.1 and port to 10001 but still doesn't show aircraft :(. By the way, I tried this when there were lots of ADS-B equipped aircraft near me.)
Decoded data (30003): NO
MLAT: YES
Extra settings: none

Anyone tried connecting Base Station to their feed? Your help would be appreciated.

Cheers from down under in New Zealand! :)
↧
Search

Feeding to Flightradar24 using a USB DVB-T stick on FreeBSD

November 27, 2018, 5:42 am
$
0
0
Hi people,

I thought some of you might be interested in the how-to I've drawn up, which explains how to feed using FreeBSD as an OS. Please let me know if you do!

Cheers,

netraam
↧
↧

Apollo 12

November 28, 2018, 2:45 am
$
0
0
OK so I was tracking RAF plane from Coningsby RAF base, I noticed the plane name was Apollo 12. anyone got any pictures of this? anyone got any ideas what it may have been doing?

Untitled.jpg
Attached Images
↧

Dump 1090 and RTLSDR issue

November 28, 2018, 9:49 am
$
0
0
Can anyone advise?

I have installed Dump 1090 but when I run it, it says I have two devices running.

I get:
Found 2 devices:
0: then a whole series of different symbols with (currently selected)
1: Realtek ...
usb open error -12
Error opening the RTL SDR device: no error

Thanks for any pointers!
↧

Has Flightradar24 finally been turned off?

November 29, 2018, 1:58 am
$
0
0
Both my desktop and mobile Flightradar24 apps have stopped working in the last 24 hours. Is it just me or have they finally given Windows apps the chop?

Martin
↧

Cannot recover my station key

November 29, 2018, 6:44 am
$
0
0
Hey folks,

after I was moving within my hometown and trying to start feeding again now my feeder application failed to login.
I then deleted the config file and wanted to log back in, i saved my key for that.

Unfortunately neither my key is accepted nor the key recovery web page is functioning at all. Is there any issue at the moment?
↧
↧

SBS1 connecting problem

November 29, 2018, 7:58 am
$
0
0
Having not used my SBS1 receiver to feed data to Flightradar24 for around a year I downloaded and installed the latest version of the feed software.The receiver is connected to a PC running Windows 10 with a USB lead. After running the software for 3 hours the following is the status:
FR24 Link : Connected via UDP
FR24 Radar Code: T-EGNX163
Local IP(s):
Aircraft Tracked: 0
Aircraft Uploaded: N/A
Receiver: sbs1usb, Connected
MLAT running: N/A

The console repeats the following 2 messsages evey 3-5 seconds:
Connecting to SBS1 receiver via USB
Could not connect to receiver

The system tray icon displays 1 red and 1 green triangle

Please could anyone suggested why the software does appear to be uploading any data to the Flightradar24 server.

Regards,

David Anderson
Loughborough, UK
↧

Missing airlines in database

November 30, 2018, 11:37 am
$
0
0
Hi! I am registering flights in my.flightradar - and some airlines that I flew with "ages" ago are both defunct and missing in your database.
Please add these airlines:
NC (NorskAir), 5S (L'Aeropostale from France), Princess Airlines (code PER - from Greece) and UJ (AeroSanta from Peru)
Hope to hear from you soon!
Best regards Torgeir
↧
Search

FR24 Mark 2 receiver not working

December 1, 2018, 10:14 am
$
0
0
just received new FR24 Mark-2 receiver from FlightRadar24.Its now 4 hours to connected to internet and antenna but still not getting any ADS-B signal.
and any one know the default username/password for login this receiver.
FR24 Mark2.jpg
Attached Images
↧

FR24 Mark 2 receiver not working

December 1, 2018, 11:22 am
$
0
0
just received new FR24 Mark-2 receiver from FlightRadar24.Its now 4 hours to connected to internet and antenna but still not getting any ADS-B signal.
and any one know the default username/password for login this receiver.

FR24 Mark2.jpg
Attached Images
↧
↧

Indian feeders

November 19, 2018, 8:09 am
$
0
0
Do we have any Indian feeders reading these forums? :confused:
↧

Windows 10 DVB-T device is not recognized properly.

December 5, 2018, 11:18 am
$
0
0
Hello everyone,

Sorry if the same problem is posted again but I've been looking at numerous posts and can't find something to work for me.

So, I have shared my data some years ago with the same PC and usb stick running windows 7 and everything worked fine. The dvb-t dongle works and it can receive 1090mhz signals. My problem is that mr-dump1090.exe cannot find the device (or so I think). When I open fr24feed.exe, the connection gets terminated:

[main][i]FR24 Feeder/Decoder
[main][i]Version: 1.0.19-15/generic
[main][i]Built on Feb 6 2018 10:20:41 (???/Windows/i386)
[main][i]Running on: Windows10.0
[main][i]Local IP(s):
[main][i]Copyright 2012-2018 Flightradar24 AB
[main][i]htt...flightradar24com
[main][i]Reader thread started
[time][i]Synchronizing time via NTP
[master][i]Starting processing thread
[reader][i]Initializing reader
[httpd][i]Server started, listening on 0.0.0.0:8754
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --net --deviceindex 1 --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[time][i]Time synchronized correctly, offset -2.0430 seconds
[main][i]Feed Network client started
[feed][i]Downloading configuration
[feed][c]Interval: 5s
[feed][c]Latitude: **.****
[feed][c]Longitude: **.****
[feed][c]GND: YES
[feed][c]NonADSB: YES
[feed][c]Timestamps: optional
[feed][c]Max range AIR: 350.0nm
[feed][c]Max range GND: 100.0nm
[feed][i]defined 4 servers
[stats][i]Stats thread started
[feed][n]LGIO4@***.***.***.***:****/UDP
[feed][n]connecting
[feed][n]connected via UDP (fd 972)
[feed][n]working
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --net --deviceindex 1 --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --net --deviceindex 1 --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated


When I open mr-dump1090.exe, it closes instantly so i open it via powershell:

PS E:\Program Files (x86)\Flightradar24Feeder\fr24feed_win32> ./mr-dump1090
-----------------------------------------------------------------------------
| dump1090 ModeS Receiver Ver : 1.10.3010.14 |
-----------------------------------------------------------------------------

Copyright (C) 2012 by Salvatore Sanfilippo <antirm>
Copyright (C) 2014 by Malcolm Robb <suppcom>

All rights reserved.

THIS SOFTWARE ... SUCH DAMAGE.

For further details refer to <https...dump1090>

Found 2 device(s):
0: á■, ┤■, SN: H² (currently selected)
1: ROOF1, ROOF1, SN:
usb_open error -12
Error opening the RTLSDR device: No error


What I understand is that there should be Realtelk instead of ROOF1 but I don't know what to do to fix it. I have installed WinUSB drivers through zadig at Bulk-In Interface 0 and 1. Can anybody help me?

Thanks.
↧

Site broken again after update

December 5, 2018, 11:41 am
$
0
0
I see the site has been updated again as all fonts have changed in the flight history menus with large dashes instead of broken lines. Very very few of the playback links are working. Most just flash the progress circle for a split second and then do nothing else. Also the playback function doesn't work on live flights anymore. Previously you could click the button and it would show the trail which you could mouse over to see the times at certain positions but that is now broken. :rolleyes:
↧
Viewing all 5745 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>