Some changes were made during the few weeks I was away from FR24. One that I immediately noticed is the 3D view angle after touchdown. Now the ground is automatically tilted up so that we can see only a short distance ahead. In a way, it looks more dramatic and wouldn't be so bad except that it cannot be manually tilted down to suit the viewer's preference. Cockpit view is too shallow to serve as an alternative, at least for me.
↧
New 3D view on landing
↧
My RPI disapeared from my network
Since yesterday my Raspberry Pi suddenly disapeared from my network - it is cabled, and the LED's shows everything is normal, but I am unable to detect it on my network and therefor my client is offline. I have checked the cables, connections etc.
↧
↧
Military Aircraft
Hello All,
Not sure this is in the right forum.....but....
Avid flgiht tracker and scanner listener! Was curious if anyone has a list of military aircraft that FlightRadar24 does pick up? I use ADS-B for most of the military flight tracking but I would like to know if FlightRadar24 does pick up so I can set up alerts. Any info would be awesome! Thanks!!
Luke
Sent from my Pixel 2 XL using Tapatalk
Not sure this is in the right forum.....but....
Avid flgiht tracker and scanner listener! Was curious if anyone has a list of military aircraft that FlightRadar24 does pick up? I use ADS-B for most of the military flight tracking but I would like to know if FlightRadar24 does pick up so I can set up alerts. Any info would be awesome! Thanks!!
Luke
Sent from my Pixel 2 XL using Tapatalk
↧
Problem getting data into ADSBscope
First post regarding data feeding so don't burn me to badly :-)
I'm new to this but have donw ome seaching through topics to try and find the answer but I'm still not getting anywhere.
I have a DVBT dongle on a Windows system that is happily tracking aircraft and uploading to FR24 via the latest version (1.0.19-15) quite happily. What I'd like is to be able to see the aircraft that I am personally tracking. I beleive that there is supposed to be a built in web page but with the --net --net-http-port 8080 arguments i only get a blank page hence trying to get ASDBscope running.
I found a thread detailing a setup but it refuses to display any aircraft. I know that the raw data output from FR24feed for a DVBT dongle should be on port 30002 and I have set this as the RAW data client on ASDBscope but nothing is coming through. I tried running RTL1090 software instead which outputs on 31001 and this works with ASDBscope but obviously i loose my FD24 data feed.
Is there something that I am missing?
Thanks
I'm new to this but have donw ome seaching through topics to try and find the answer but I'm still not getting anywhere.
I have a DVBT dongle on a Windows system that is happily tracking aircraft and uploading to FR24 via the latest version (1.0.19-15) quite happily. What I'd like is to be able to see the aircraft that I am personally tracking. I beleive that there is supposed to be a built in web page but with the --net --net-http-port 8080 arguments i only get a blank page hence trying to get ASDBscope running.
I found a thread detailing a setup but it refuses to display any aircraft. I know that the raw data output from FR24feed for a DVBT dongle should be on port 30002 and I have set this as the RAW data client on ASDBscope but nothing is coming through. I tried running RTL1090 software instead which outputs on 31001 and this works with ASDBscope but obviously i loose my FD24 data feed.
Is there something that I am missing?
Thanks
↧
Connected but not online Windows
Hi guys,
I have a DVB-T+DAB+FM USB which I am trying to setup in a Windows 10 x64.
Feeder status: 01.jpg
Settings: 02.jpg
Console:
But when I go to "My data sharing" in FR24 App my radar is offline. I am in a domain environment and have Kaspersky Total Security. Do I need to open some port?
I have a DVB-T+DAB+FM USB which I am trying to setup in a Windows 10 x64.
Feeder status: 01.jpg
Settings: 02.jpg
Console:
Code:
[main][i]Reader thread started
[reader][i]Initializing reader
[time][i]Synchronizing time via NTP
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[time][i]Time synchronized correctly, offset +1.0180 seconds
[main][i]Feed Network client started
[feed][i]Downloading configuration
[feed][c]Interval: 5s
[feed][c]Latitude: 57.xxxx
[feed][c]Longitude: 12.xxxx
[feed][c]GND: YES
[feed][c]NonADSB: YES
[feed][c]Timestamps: optional
[feed][c]Max range AIR: 350.0nm
[feed][c]Max range GND: 100.0nm
[feed][i]defined 5 servers
[stats][i]Stats thread started
[feed][n]RADARNAME@EXTERNALIP:8099/UDP
[feed][n]connecting
[feed][n]connected via UDP (fd 1020)
[feed][n]working
[feed][n]ping 1
[feed][n]syncing stream result: 1
[feed][n]ping 2
[feed][n]syncing stream result: 1
[feed][n]ping 3
[feed][n]syncing stream result: 1
[feed][n]ping 4
[feed][n]syncing stream result: 1
[feed][n]ping 5
[feed][n]syncing stream result: 1
[feed][n]ping 6
[feed][n]syncing stream result: 1
[feed][n]ping 7
[feed][n]syncing stream result: 1↧
↧
Feed problems after Windows upgrade
Hi,
We have noticed quite a few feeders have problems with their feeds after installing updates on their PCs. Please note that in this case you need to reinstall drivers from Zadig. This should fix the problem.
http://zadig.akeo.ie/
We have noticed quite a few feeders have problems with their feeds after installing updates on their PCs. Please note that in this case you need to reinstall drivers from Zadig. This should fix the problem.
http://zadig.akeo.ie/
↧
Is there a minimum quality of self-collected data?
Hello@all.
I have a question, is there a minimum quality of self-collected ADS-B data?
I would like to provide data, but I am not sure if there where I live on it rewards the data.
I live in Eberbach Germany (49.464191 8.987267).
My english writting is terrible, i have translate this post by Google.
Greetz Conan
I have a question, is there a minimum quality of self-collected ADS-B data?
I would like to provide data, but I am not sure if there where I live on it rewards the data.
I live in Eberbach Germany (49.464191 8.987267).
My english writting is terrible, i have translate this post by Google.
Greetz Conan
↧
Reply to Swifty
Ref : https://forum.flightradar24.com/thre...l=1#post105203
"What is becoming of this site if bad info is uploaded and you cannot trust the database or the people that add to it.
Tyke restart your blog people will always steal or copy your info like they do now, myself i do not repost new airliners boeing or airbus they go in my private d/b.
Now after this i have a lot of info to recheck."
Swifty, I am replying in a separate thread in the off-topic section because the mods would have probably removed any reply made there.
People cannot steal or copy what isn't there. That is the underlying reason why I ended it. But regardless, you have 2 blog sites and 2 google sheets at your disposal for Boeing production already so why do you wish for me to restart?
I could restart it tomorrow, but only for a minimum combined contributions/donations of 500 per month up front. Why? Because a) to provide a 5-star quality service with accurate data which has been thoroughly researched and cross-checked before publishing takes time and effort to compile, and b) after the blatant copy and paste aggravation I suffered from one individual with the previous iteration, that's how much I'd want for me to not give a damn what happens to my work once published.
As the likelihood of this ever happening is slim to zero then you're stuck with your 2-star "service," but at least it's free, right? I did consider offering it on a subscription where you would log-in to access the data once you'd subscribed, but all that would happen there is I'd probably get a handful of subs but I can guarantee at least of them would copy and paste the data from the private area into the public domain and to sites like ATDB, Planebase, Puget blog etc, and that's just not cricket.
Unless you can arrange the funding I'd want to restart then I'll leave you to look forward to the CONFIRMED Iran Air B77Ws and the apparently endless stream of SCAT 737-8s.. :D
"What is becoming of this site if bad info is uploaded and you cannot trust the database or the people that add to it.
Tyke restart your blog people will always steal or copy your info like they do now, myself i do not repost new airliners boeing or airbus they go in my private d/b.
Now after this i have a lot of info to recheck."
Swifty, I am replying in a separate thread in the off-topic section because the mods would have probably removed any reply made there.
People cannot steal or copy what isn't there. That is the underlying reason why I ended it. But regardless, you have 2 blog sites and 2 google sheets at your disposal for Boeing production already so why do you wish for me to restart?
I could restart it tomorrow, but only for a minimum combined contributions/donations of 500 per month up front. Why? Because a) to provide a 5-star quality service with accurate data which has been thoroughly researched and cross-checked before publishing takes time and effort to compile, and b) after the blatant copy and paste aggravation I suffered from one individual with the previous iteration, that's how much I'd want for me to not give a damn what happens to my work once published.
As the likelihood of this ever happening is slim to zero then you're stuck with your 2-star "service," but at least it's free, right? I did consider offering it on a subscription where you would log-in to access the data once you'd subscribed, but all that would happen there is I'd probably get a handful of subs but I can guarantee at least of them would copy and paste the data from the private area into the public domain and to sites like ATDB, Planebase, Puget blog etc, and that's just not cricket.
Unless you can arrange the funding I'd want to restart then I'll leave you to look forward to the CONFIRMED Iran Air B77Ws and the apparently endless stream of SCAT 737-8s.. :D
↧
3d replay
Hello all,
Two questions regarding the 3d viz:
- It does not seem that we can replay flight in 3d ... is there a tool out there that would enable such a replay from the csv or kml file?
- In the 3d view it seems that the attitude of the aircraft varies ... (roll for example) ... it does seem that this is part of the ADS-B data captured. How is it done?
Cheers
Guillaume
Two questions regarding the 3d viz:
- It does not seem that we can replay flight in 3d ... is there a tool out there that would enable such a replay from the csv or kml file?
- In the 3d view it seems that the attitude of the aircraft varies ... (roll for example) ... it does seem that this is part of the ADS-B data captured. How is it done?
Cheers
Guillaume
↧
↧
Missing Data Tags
Hello:
The past few days I have not been receiving data tags for aircraft. I used to be able to see callsigns associated with aircraft.
Any help please.
The past few days I have not been receiving data tags for aircraft. I used to be able to see callsigns associated with aircraft.
Any help please.
↧
Remove offline unused Radar
I've setup a RPi with the RF wizard and everything was registered. Has some issues and after messing around eventually got everything working.
I've originally got a radar ID and then was assigned another one after I got it working.
Under my datasharing I have 2 radar ID's. One is working 100% and the other is the old initial one (Offline and not sent any data)
Is there a way to remove this from my profile?
I've originally got a radar ID and then was assigned another one after I got it working.
Under my datasharing I have 2 radar ID's. One is working 100% and the other is the old initial one (Offline and not sent any data)
Is there a way to remove this from my profile?
↧
Dela data på eller av när gul ?
Under fliken: My data sharing finns en knapp: Stats Sharing. Ska den vara gul för av eller på ? Hur man än gör så uppmanar den mig att dela...
↧
Raspberry Pi 2 booting problem
Suddenly the power cable was disconnected, and the the Pi with configured system not booting anymore.
How can I fix?![]()
Tapatalkkal küldve az én Mi A1 eszközömről
How can I fix?
Tapatalkkal küldve az én Mi A1 eszközömről
↧
↧
Duxford Air show Videos eg Fighter jets & Patrouille de France aerobatics
see https://www.youtube.com/user/AwesomeFullHDvideos/videos
lots more videos still to upload to yotube over next day or 2
dave
lots more videos still to upload to yotube over next day or 2
dave
↧
RSSI Values compressed
I'm not sure this qualifies as a hardware problem TBH but wondered if others are seeing a very limited range of RSSI values on their /dump1090/gmap.html webpage.
I'm using only the software provided in the last week or so by FlightRadar24 for the Raspberry Pi.
Mine only ever covers the range from approx -30.5 to -34 dbFS. This happens with two independent raspberry pi setups and regardless of the aerial in use, the dongle in use (I have four to choose from, one of which is a Flightaware Pro Stick Plus) and is largely independent of the range of the aircraft. I've also played around with gain settings as well as agc on and off, but the only thing that varies is the range and number of aircraft messages decoded.
For example an aircraft around 2 miles away on final approach and which is clearly visible to me as well as to the aerial, might give a reading of -30 or so while those a good bit further away, even up to 150nm, can be anything from say -32 to -34.
I have experimented with aerials including a coaxial colinear and a discone using a good low loss coax for 1090MHz, both of these on the roof of the house and with a very good take-off in all directions.
Next step will be to add a filtered LNA at the antenna end of the feeder although I'm seriously wondering whether even that will make my range of RSSI values appear more sensible.
I'm using only the software provided in the last week or so by FlightRadar24 for the Raspberry Pi.
Mine only ever covers the range from approx -30.5 to -34 dbFS. This happens with two independent raspberry pi setups and regardless of the aerial in use, the dongle in use (I have four to choose from, one of which is a Flightaware Pro Stick Plus) and is largely independent of the range of the aircraft. I've also played around with gain settings as well as agc on and off, but the only thing that varies is the range and number of aircraft messages decoded.
For example an aircraft around 2 miles away on final approach and which is clearly visible to me as well as to the aerial, might give a reading of -30 or so while those a good bit further away, even up to 150nm, can be anything from say -32 to -34.
I have experimented with aerials including a coaxial colinear and a discone using a good low loss coax for 1090MHz, both of these on the roof of the house and with a very good take-off in all directions.
Next step will be to add a filtered LNA at the antenna end of the feeder although I'm seriously wondering whether even that will make my range of RSSI values appear more sensible.
↧
history of departing flights on specific date at specific airport
I am looking for all departed flights on May 13th from Marseille (MRS)
Is there a way to find them here via FR24?
If not, does anyone have suggestion how to get al list of all scheduled departing flights on May 13th from MRS. Then I can check their historic flightstatus through FR24.
Reason: Ryanair is now claiming that their flight FR6505 was cancelled due to a strike of air traffic controllers. I did depart on May 13th from MRS en so did several other airlines on that day departing and arriving. So a strike seems quit odd to me. I allready findout through FR24 that the same flight was cancelled also a week and two weeks before my scheduled flight.
I was looking at the info of MRS but it only goes back till yesterday. Remarkably I saw a lot of Ryanair and Easyjet flights canceled, while other flight did depart. Has this something to do white their lack of pilots?
Thanks!
Is there a way to find them here via FR24?
If not, does anyone have suggestion how to get al list of all scheduled departing flights on May 13th from MRS. Then I can check their historic flightstatus through FR24.
Reason: Ryanair is now claiming that their flight FR6505 was cancelled due to a strike of air traffic controllers. I did depart on May 13th from MRS en so did several other airlines on that day departing and arriving. So a strike seems quit odd to me. I allready findout through FR24 that the same flight was cancelled also a week and two weeks before my scheduled flight.
I was looking at the info of MRS but it only goes back till yesterday. Remarkably I saw a lot of Ryanair and Easyjet flights canceled, while other flight did depart. Has this something to do white their lack of pilots?
Thanks!
↧
Stats windows showing offline but feeding data
On my stats page it shows as offline but Aircraft seen, Positions reported and Hits reported are all increasing.
The status of fr24feed is below
pi@raspberrypi:~ $ fr24feed-status
[ ok ] FR24 Feeder/Decoder Process: running.
[ ok ] FR24 Stats Timestamp: 2018-05-30 08:43:07.
[ ok ] FR24 Link: connected [UDP].
[ ok ] FR24 Radar: T-*******.
[ ok ] FR24 Tracked AC: 15.
[ ok ] Receiver: connected (86137 MSGS/0 SYNC).
[ ok ] FR24 MLAT: ok [UDP].
[ ok ] FR24 MLAT AC seen: 15.
Is there something wrong with the feeder or FR24 stats page.
The status of fr24feed is below
pi@raspberrypi:~ $ fr24feed-status
[ ok ] FR24 Feeder/Decoder Process: running.
[ ok ] FR24 Stats Timestamp: 2018-05-30 08:43:07.
[ ok ] FR24 Link: connected [UDP].
[ ok ] FR24 Radar: T-*******.
[ ok ] FR24 Tracked AC: 15.
[ ok ] Receiver: connected (86137 MSGS/0 SYNC).
[ ok ] FR24 MLAT: ok [UDP].
[ ok ] FR24 MLAT AC seen: 15.
Is there something wrong with the feeder or FR24 stats page.
↧
↧
Rpi FR24 Feed not working
Hi Everyone
I had to do some big OS upgrades to my rpi and now FR24 wont run
its using dump1090-mutality
the error im getting is
usb_claim_interface error -6
Error opening the RTLSDR device: Device or resource busy
everything I find says to blacklist the module, that hasnt worked
this is my lsmod
root@raspberrypi:/var/log/fr24# lsmod
Module Size Used by
fuse 92214 3
appletalk 30895 0
psnap 2602 1 appletalk
llc 5407 1 psnap
ax25 59165 0
evdev 11644 0
ir_lirc_codec 4604 0
lirc_dev 8313 1 ir_lirc_codec
r820t 18930 0
i2c_mux 5474 0
snd_bcm2835 23054 1
snd_pcm 89526 1 snd_bcm2835
snd_timer 22396 1 snd_pcm
snd 59578 5 snd_timer,snd_bcm2835,snd_pcm
uio_pdrv_genirq 3718 0
uio 9901 1 uio_pdrv_genirq
fixed 3033 0
ip_tables 12395 0
x_tables 21417 1 ip_tables
ipv6 399486 48
usuig dump1090-mutality on its own I get the same errror
root@raspberrypi:/var/log/fr24# dump1090-mutability --interactive --net
Thu May 31 16:50:37 2018 NZST dump1090-mutability v1.14 starting up.
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001 (currently selected)
usb_claim_interface error -6
Error opening the RTLSDR device: Device or resource busy
root@raspberrypi:/var/log/fr24#
What else can I try?
I had to do some big OS upgrades to my rpi and now FR24 wont run
its using dump1090-mutality
the error im getting is
usb_claim_interface error -6
Error opening the RTLSDR device: Device or resource busy
everything I find says to blacklist the module, that hasnt worked
this is my lsmod
root@raspberrypi:/var/log/fr24# lsmod
Module Size Used by
fuse 92214 3
appletalk 30895 0
psnap 2602 1 appletalk
llc 5407 1 psnap
ax25 59165 0
evdev 11644 0
ir_lirc_codec 4604 0
lirc_dev 8313 1 ir_lirc_codec
r820t 18930 0
i2c_mux 5474 0
snd_bcm2835 23054 1
snd_pcm 89526 1 snd_bcm2835
snd_timer 22396 1 snd_pcm
snd 59578 5 snd_timer,snd_bcm2835,snd_pcm
uio_pdrv_genirq 3718 0
uio 9901 1 uio_pdrv_genirq
fixed 3033 0
ip_tables 12395 0
x_tables 21417 1 ip_tables
ipv6 399486 48
usuig dump1090-mutality on its own I get the same errror
root@raspberrypi:/var/log/fr24# dump1090-mutability --interactive --net
Thu May 31 16:50:37 2018 NZST dump1090-mutability v1.14 starting up.
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001 (currently selected)
usb_claim_interface error -6
Error opening the RTLSDR device: Device or resource busy
root@raspberrypi:/var/log/fr24#
What else can I try?
↧
Can I use one ADS-B antenna to feed Flightradar24 and as well as to Flightaware ?
Hi, I'm Flight Nerd as well as Space lover to I Have one Doubt Please help me to fix the issue
As I'm Interested in Contributing with those two awesome websites for Science I wish to ask this mean question to all
would doing lke this interference with both signals?
I wish you can help me :)
As I'm Interested in Contributing with those two awesome websites for Science I wish to ask this mean question to all
would doing lke this interference with both signals?
I wish you can help me :)
↧
Raspberry fr24 update 1.0.18.* to 1.0.19.* no service
Im use Linux raspberrypi 4.1.19+ at raspberry 1B and last update no work
Manualy fix like:
1. sudo apt-get install libcap2-bin
2. Save /etc/fr24feed.ini
3. pi@raspberrypi ~ $ sudo apt-get remove fr24feed
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be REMOVED:
fr24feed
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 563 kB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 84066 files and directories currently installed.)
Removing fr24feed ...
pi@raspberrypi ~ $ sudo apt-get install fr24feed
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
fr24feed
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/1,214 kB of archives.
After this operation, 563 kB of additional disk space will be used.
Selecting previously unselected package fr24feed.
(Reading database ... 84047 files and directories currently installed.)
Unpacking fr24feed (from .../fr24feed_1.0.19-15_armhf.deb) ...
Setting up fr24feed (1.0.19-15) ...
useradd: user 'fr24' already exists
Failed to issue method call: Unit name udev is not valid.
Failed to issue method call: Invalid argument
dpkg: error processing fr24feed (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
fr24feed
E: Sub-process /usr/bin/dpkg returned an error code (1)
4. from /var/cash/apt/archives files any of 1.0.18.* .deb extract from /CONTENTS/etc/init.d/fr24feed and past to raspberry folder /etc/init.d/fr24feed
5. after next update - go to point 3. :)
note: in 1.0.19.* - /etc/systemd/system/fr24feed.service
why you not support old raspberry ????
Manualy fix like:
1. sudo apt-get install libcap2-bin
2. Save /etc/fr24feed.ini
3. pi@raspberrypi ~ $ sudo apt-get remove fr24feed
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be REMOVED:
fr24feed
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 563 kB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 84066 files and directories currently installed.)
Removing fr24feed ...
pi@raspberrypi ~ $ sudo apt-get install fr24feed
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
fr24feed
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/1,214 kB of archives.
After this operation, 563 kB of additional disk space will be used.
Selecting previously unselected package fr24feed.
(Reading database ... 84047 files and directories currently installed.)
Unpacking fr24feed (from .../fr24feed_1.0.19-15_armhf.deb) ...
Setting up fr24feed (1.0.19-15) ...
useradd: user 'fr24' already exists
Failed to issue method call: Unit name udev is not valid.
Failed to issue method call: Invalid argument
dpkg: error processing fr24feed (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
fr24feed
E: Sub-process /usr/bin/dpkg returned an error code (1)
4. from /var/cash/apt/archives files any of 1.0.18.* .deb extract from /CONTENTS/etc/init.d/fr24feed and past to raspberry folder /etc/init.d/fr24feed
5. after next update - go to point 3. :)
note: in 1.0.19.* - /etc/systemd/system/fr24feed.service
why you not support old raspberry ????
↧