Hi! So, on 11.06 I will have a flight from LUKK -> LTAI . I was looking on the FR24 for that flight, but the flight is missing. On the aiport site, it shows up, but on FR24, there is nothing regarding the flight. The flight nr according to the airport site is: KK6728 , and it should take of at 4 AM. The flights before and after my flight are showing up. Any ideas why it dosen't show my flight on the site? Ty.
↧
Missing flight?
↧
Unable to get aircraft full nfo
Dear all, I am newbie here, I will really appreciate if someone help me in this matter.
I use FR24 website ( using Chrome) for just for hobby, from last couple of days I am having trouble with getting full aircraft info and airport info.
I can see all aircrafts on my screen but when I click on an aircraft, some other application or mobile android system is stopping to pop up information window, only aircraft change color from yellow to red but nothing happen.
Other problem is with search, when I write any airport name/ code, a full airport name show up but once clock on name, nothing happen again, normally, if you click on it, automatically system will take you there.
Everything was fine till couple of days ago, I try my best to figure it out but still fail.
I am using Android 5.1
Chrome 74.0.3729.157
Avast mobile antivirus.
I can understand some application is stopping Fr24 but how to fix it?
Thanks
Soha
I use FR24 website ( using Chrome) for just for hobby, from last couple of days I am having trouble with getting full aircraft info and airport info.
I can see all aircrafts on my screen but when I click on an aircraft, some other application or mobile android system is stopping to pop up information window, only aircraft change color from yellow to red but nothing happen.
Other problem is with search, when I write any airport name/ code, a full airport name show up but once clock on name, nothing happen again, normally, if you click on it, automatically system will take you there.
Everything was fine till couple of days ago, I try my best to figure it out but still fail.
I am using Android 5.1
Chrome 74.0.3729.157
Avast mobile antivirus.
I can understand some application is stopping Fr24 but how to fix it?
Thanks
Soha
↧
↧
Email alert does not working on browser
i have SILVER subs, but does not working email alert since June 8th!
My previous subscription expired on June 8th, which was then extended as it was not automatic!
Since then, the set email alerts do not come! Please look after what has changed, which is why it does not work!
I also tried another registration during the trial period and I don't get any alerts!
My previous subscription expired on June 8th, which was then extended as it was not automatic!
Since then, the set email alerts do not come! Please look after what has changed, which is why it does not work!
I also tried another registration during the trial period and I don't get any alerts!
↧
Max Range Performance Graph missing
All of my performance graphs are showing except the Max Range.
It looks as if you have loaded a webpage where the file for the graphic is missing.
Max Range Missing.png
Is this being caused by something I did wrong during the configuration process? I'm sure it's possible I missed something.
I installed the version with automated install where I would enter ./install.sh to select who I wanted to feed to and the necessary scripts would run.
Thanks in advance.
It looks as if you have loaded a webpage where the file for the graphic is missing.
Max Range Missing.png
Is this being caused by something I did wrong during the configuration process? I'm sure it's possible I missed something.
I installed the version with automated install where I would enter ./install.sh to select who I wanted to feed to and the necessary scripts would run.
Thanks in advance.
↧
Airborne flight "landed over a week ago??"
I see this from time to time.
I will track a live airborne flight with my receiver setup.
I'll click over and try to find this same flight on FlightAware or flightradar24 and it will say the flight isn't even in the air.
Are these flights flying without a flight plan?
KANZA86 FlightAware.png
KANZA86 dump1090.png
I will track a live airborne flight with my receiver setup.
I'll click over and try to find this same flight on FlightAware or flightradar24 and it will say the flight isn't even in the air.
Are these flights flying without a flight plan?
KANZA86 FlightAware.png
KANZA86 dump1090.png
↧
↧
I'm trying to understand which options it's better ? Automatic Gain Control (-10)
↧
Anyone try powering your Pi with a PoE adapter?
I have the old exterior weatherized box that Cable TV usually uses that I was planning on mounting my Pi and RTL dongle in an exterior location (depending on how high I can get my antenna and how far the coax goes).
In anticipation of this, I purchased a Gigabit Power Over Ethernet Splitter. It reports to "Delivers regulated 5 volt, 10 watts up to 328 feet".
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Has anyone tried this before?
Will it introduce noise?
Thanks in advance.
In anticipation of this, I purchased a Gigabit Power Over Ethernet Splitter. It reports to "Delivers regulated 5 volt, 10 watts up to 328 feet".
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Has anyone tried this before?
Will it introduce noise?
Thanks in advance.
↧
Lots of rotary aircraft - STL Blues downtown party?
I just happened to pull up my dump1090 view and saw a bunch of helicopters near downtown St. Louis.
I wonder if they have anything to do with the STL Blues party going on downtown today under the Gateway Arch?
Screen Shot 2019-06-15 at 2.10.33 PM.png
I wonder if they have anything to do with the STL Blues party going on downtown today under the Gateway Arch?
Screen Shot 2019-06-15 at 2.10.33 PM.png
↧
Switch from LAN to WiFi
I've been searching here because I was sure I remember reading instructions on how to do this but I cant find anything.
I have a running setup but would like to relocate my antenna/feeder.
At the moment the only way I can do this is to get WiFi working on my Pi.
I'm pretty sure it involves sudo nano wpa_supplicant.conf, and editing the file for my SSID and WPA-PSK password etc.
The part I'm not sure about is where to sudo nano this file.
I have a fully configured running setup at the moment and have been making all of my changes SSH.
Thanks in advance.
I have a running setup but would like to relocate my antenna/feeder.
At the moment the only way I can do this is to get WiFi working on my Pi.
I'm pretty sure it involves sudo nano wpa_supplicant.conf, and editing the file for my SSID and WPA-PSK password etc.
The part I'm not sure about is where to sudo nano this file.
I have a fully configured running setup at the moment and have been making all of my changes SSH.
Thanks in advance.
↧
↧
Alaska Airline 238 circle mid flight
Hi,
I just noticed a circular contrail in the sky and found it odd. After watching a replay of recent flights over my area I see that ASA238 did a circle and then continued on to Seattle. Can anyone enlighten me as to why this happened?
Thanks,
Julian
Screen Shot 2019-06-16 at 11.44.34 AM.jpg
I just noticed a circular contrail in the sky and found it odd. After watching a replay of recent flights over my area I see that ASA238 did a circle and then continued on to Seattle. Can anyone enlighten me as to why this happened?
Thanks,
Julian
Screen Shot 2019-06-16 at 11.44.34 AM.jpg
↧
FR24 Feeder Settings, Process Arguements don't stick
As shown in the quick start guide I'm putting the follow string of text in the process arguments field of the FR24 settings
--net --gain -10 --lat xx.xxxx --lon -yyy.yyyy
When I click save, then click restart those settings don't stick, they disappear. Can anyone shed some light on what I am doing wrong?
Thank you
--net --gain -10 --lat xx.xxxx --lon -yyy.yyyy
When I click save, then click restart those settings don't stick, they disappear. Can anyone shed some light on what I am doing wrong?
Thank you
↧
Need advice in buying another outside antenna
Good evening,
I am new to this forum. I recently purchased a raspberry and a Jetvision ADS-B USB Dongle (R820T2) + Small Indoor Antenna. This dongle has a very small "connection opening" to connect the indoor antenna to the dongle.
I do not have a very good range and of course I want to increase the range.
If I want to but another (outside) antenna and cable how can I connect the "new" antenna to this double. For what I read and saw online the able connectors are totally different,( bigger) than the small connector I use.
Is it possible to buy an antenna and cable and connect this to my dongle or do I have to but another dongle?
Could some one please help me out. Any advice for an antenna is highly appreciated:) I am absolutely non technical, so building one myself is no option.:(
Thanks a lot
I am new to this forum. I recently purchased a raspberry and a Jetvision ADS-B USB Dongle (R820T2) + Small Indoor Antenna. This dongle has a very small "connection opening" to connect the indoor antenna to the dongle.
I do not have a very good range and of course I want to increase the range.
If I want to but another (outside) antenna and cable how can I connect the "new" antenna to this double. For what I read and saw online the able connectors are totally different,( bigger) than the small connector I use.
Is it possible to buy an antenna and cable and connect this to my dongle or do I have to but another dongle?
Could some one please help me out. Any advice for an antenna is highly appreciated:) I am absolutely non technical, so building one myself is no option.:(
Thanks a lot
↧
Looking for instructions on how to upgrade dual feeds to FR24 & FA
Ive been feeding to FA & FR24 for a few years now. For whatever reason, my FR24 feed has died. It used to die about once every few months and all I needed to do was re-boot the R-Pi and all would be fine again. Now, nothing. My FA feed still works fine but FR24 wont come back up.
Does anyone have some instructions on how to install the latest software so that I can run both again? Its been so long since I installed the 1st one, I do not recall how I did it.
Thanks,
Jim
Does anyone have some instructions on how to install the latest software so that I can run both again? Its been so long since I installed the 1st one, I do not recall how I did it.
Thanks,
Jim
↧
↧
Airline Delays
I only have non-subscription access to flightradar24 so can only look back 7 days.
I'm trying to get my head around why Virgin Atlantic (VS301 DEL-LHR) is consistently delayed. I know Pakistan has closed its airspace so re-routing is in operation.
But when I look at similar flights such as Air India (AI111 DEL-LHR) or Air France (AF225 DEL-CDG) they all seem to be unaffected.
Am I just interpreting the data incorrectly?
:confused:
I'm trying to get my head around why Virgin Atlantic (VS301 DEL-LHR) is consistently delayed. I know Pakistan has closed its airspace so re-routing is in operation.
But when I look at similar flights such as Air India (AI111 DEL-LHR) or Air France (AF225 DEL-CDG) they all seem to be unaffected.
Am I just interpreting the data incorrectly?
:confused:
↧
Dump1090 - error 404 - PiAware + FR24
I need some help if you would be so kind. Dump1090 shows error 404.
I am using:
+ just installed FR24 using sudo bash -c "$(wget -O - ......etc.... install_fr24_rpi.sh)", provided all data during configuration, typed everything in settings in IP-of-Pi:8754 (as per the Settings page image in the #2 post: 2019-PI24-QuickStart-Guide).
Changed receiver to Beast TCP (as per the thread BUG-receiver-type-avr-tcp-and-auto-configuration-not-working) but dump1090 still isn't working. IP-of-Pi/dump1090 returns "404 - Not Found"
What am I doing wrong?
Attachment 10788
I am using:
- FlightAware ProStick Plus
- RPi 3B+
- PiAware pre-installed (dump1090-fa is working now)
+ just installed FR24 using sudo bash -c "$(wget -O - ......etc.... install_fr24_rpi.sh)", provided all data during configuration, typed everything in settings in IP-of-Pi:8754 (as per the Settings page image in the #2 post: 2019-PI24-QuickStart-Guide).
Changed receiver to Beast TCP (as per the thread BUG-receiver-type-avr-tcp-and-auto-configuration-not-working) but dump1090 still isn't working. IP-of-Pi/dump1090 returns "404 - Not Found"
What am I doing wrong?
Attachment 10788
↧
More details about my own radar?
Hi,
Im using a raspberry pi 2 with fr24, it works great.
But I would love to know more about the planes I tracked.
Is there an option or way to get a summery, like: most seen plane type, most destination and so on.
So is there a way to get more details about my own radar?
Best wishes
Im using a raspberry pi 2 with fr24, it works great.
But I would love to know more about the planes I tracked.
Is there an option or way to get a summery, like: most seen plane type, most destination and so on.
So is there a way to get more details about my own radar?
Best wishes
↧
Feed data to FR24 and also to a screen
Hi there guys.
I thought about a mini project with a rPI that would feed data from the ADS-B to FR24 but besides this I also want to show that data to a screen connected to my rPI (e.g. the closest plane landing at the airport near me).
Do you think this is possible or the app provided by FR24 is completely closed with regards to APIs?
I was thinking of using Raspbian as OS, but if you think this can be better achieved by using Pi24, I'm open to it.
Thank you in advance for your help!
P.S.: If I wasn't clear enough, please tell me and I will try to elaborate.
I thought about a mini project with a rPI that would feed data from the ADS-B to FR24 but besides this I also want to show that data to a screen connected to my rPI (e.g. the closest plane landing at the airport near me).
Do you think this is possible or the app provided by FR24 is completely closed with regards to APIs?
I was thinking of using Raspbian as OS, but if you think this can be better achieved by using Pi24, I'm open to it.
Thank you in advance for your help!
P.S.: If I wasn't clear enough, please tell me and I will try to elaborate.
↧
↧
rare
so it seems people know when that certain aircraft comes along to their local airport. I am from Manchester living in Stockport and I was wondering if anyone can point me into the correct direction for this information. Example apparently a Korean aircraft landed at Manchester airport yesterday. I wish I had seen that. I'm mainly on about planes what are rare and can't always be tracked. thanks.
↧
How to test jettison DVB-T dongle
Good afternoon,
I am facing a lot of troubles feeding data. Spend two days reading forums and tried all the solutions given. Till two days ago I was able to feed data to Flightradar24, and than at 8 am it suddenly stopped.
Formatted my SD micro card ,again and again. Installed the fr24 software. I was able to see my raspberry. Did the suggested tests.
Is says no receiver found. So started all over again. Tries other tracking software as well. Same results.
To be sure my dongle is Ok I would like to "test" the dongle. Is there a way to do so? I am working with a Mac, I searched the internet, but could not find anything I could use.
used the Fr24 steps top install a new system, the first time it worked perfectly. read all the steps and used all setting given by the gurus here on the forum, but no luck.
Perhaps I should mention I am new to this, and do not have knowledge of Linux and/or Raspberry.
If the dongle is not Ok I can contact Jetvisioin again, asking for their help. The dongle is brand new.
I "just" want to have a working device and enjoy flighttracking.
Thanks,
I am facing a lot of troubles feeding data. Spend two days reading forums and tried all the solutions given. Till two days ago I was able to feed data to Flightradar24, and than at 8 am it suddenly stopped.
Formatted my SD micro card ,again and again. Installed the fr24 software. I was able to see my raspberry. Did the suggested tests.
Is says no receiver found. So started all over again. Tries other tracking software as well. Same results.
To be sure my dongle is Ok I would like to "test" the dongle. Is there a way to do so? I am working with a Mac, I searched the internet, but could not find anything I could use.
used the Fr24 steps top install a new system, the first time it worked perfectly. read all the steps and used all setting given by the gurus here on the forum, but no luck.
Perhaps I should mention I am new to this, and do not have knowledge of Linux and/or Raspberry.
If the dongle is not Ok I can contact Jetvisioin again, asking for their help. The dongle is brand new.
I "just" want to have a working device and enjoy flighttracking.
Thanks,
↧
[feed][i]sent 0, filtered 5
Hi!
I'm using Linux feeding client, however, it is trying to filter out 90% of the traffic after some time from feed start. So, in the beginning nothing has been filtered, in starts after some minutes. This results in "no data sent" in statistic or even "offline" mode. Is there any parameters for fr24.ini to prevent this behaviour?
I'm using Linux feeding client, however, it is trying to filter out 90% of the traffic after some time from feed start. So, in the beginning nothing has been filtered, in starts after some minutes. This results in "no data sent" in statistic or even "offline" mode. Is there any parameters for fr24.ini to prevent this behaviour?
↧