Quantcast
Channel: Flightradar24 Forum
Viewing all 5745 articles
Browse latest View live

Wrong speed for plane

$
0
0
Hi,
my VAN'S RV6 is equipped with a fresh updated FUNKE TRT800H Transponder and a Garmin 496 GPS sends the ADS-B Data to the Transponder.

I can see my flights very well in FlightRadar24, altitude is okay, but my flying speed is wrong. My real speed is between 110 and 150 Knots but Flightradar History shows wrong Speeds between 110 and 515 Knots ????
Is it a Transponder Problem ? Last Year I had no ADS-B out and the plane was sometimes visible with MLAT, but with correct speed.

Search for PH-CRJ in flightradar24. (I am not allowed to post Link)

Any Idea ??
Thanks, Achim

Weatherproof antenna?

$
0
0
Hello
I have a Raspi and tought it would be great to feed data to Flightradar24. Now, if i click on the required items i saw that i need this dongle and antenna. The antenna is described as an indoor antenna, does this matter? I`d like to put the antenna on top of the roof so it should be weatherproof ;) Also, do i have to buy an adapter for antenna and dongle?

Thanks for your help

Problems with AR on iPhone XS

$
0
0
Hi,
I am using Flightradar24 App version 8.2.2 on a iPhone XS. When I am using the AR sight the problem is that no flights are shown. Only in the top left corner an undefined flight is shown. The compass in the right bottom corner doesn’t rotate. I installed the app and started the iPhone several times. There was no difference.

The „funny“ thing is that 1. the compass app on the same iPhone works perfect, 2. the flightradar24 app works perfekt on an the exact same iPhone typ of my friend. We compared all settings and found no differences.

Does anybody know this problem or has a hint what can be done to have a working AR view?

Thanks for any helping hint
Regards Manasse
Attached Images

Data Sharing Statistics - Wrong Station F-USDD2

$
0
0
Often when I refresh my data sharing page it switches to the wrong station F-USDD2 (ID 1035) rather than my own F-EGQS1. Is this a common fault?

Feeder filtering most data from upload

$
0
0
Hi!

I'm using Linux feeding client, however, it is trying to filter out 90% of the traffic after some time from feed start. So, in the beginning nothing has been filtered, in starts after some minutes. This results in "no data sent" in statistic or even "offline" mode. Is there any parameters for fr24.ini to prevent this behaviour?

Email alert feature

$
0
0
Just noticed a new feature has appeared in 'My Data Sharing' to alert feeders when they are offline for pre-set hours. Something that has been asked for in this forum over time :)

Can't run fr24feed as service

$
0
0
I had fr24feed running on a RPI3 until my SD card corrupted, after reinstall it refused to work so I tried an install on a Debian 9.9 VM instead.

After completing the debian install I got the usual Receiver not connected and MLAT not running, and started searching the forums. I got it running by stopping the service and running just the fr24feed start. It is now running, but in a terminal window that will terminate on closing. I thought about running it in background/screen, but there must be some better way of fixing this?

DIY Feeder problems

$
0
0
Hello there guys,

I am trying to build a feeder using a rPI and a DVB dongle but I encountered some problems and I'm not sure of what can I do now.

The dongle I am using is an generic one that also had an antenna. My question is how can I figure out what is the problem, whether the dongle or the antenna are not good?
And if the one of them are not supported, what can I do to fix them?

Here is a picture of the dongle&antenna:
dongle.png

Thank you in advance for your answers!
Attached Images

ffeder outage ??eh ?

$
0
0
got now for the 2nd time the email saying
Hello,

Our monitoring shows that your feed T-EDKA30 has been offline since 2019-06-26 06:26:36 UTC. If you are having problems with your receiver setup, please feel free to contact support@fr24.com for advice and assistance.

but if i check, the scripts are running as it should be.
however, the fr24feed.log did end with this after i rebooted the system

2019-06-26 08:26:44 | [main][i]Terminating on user request
2019-06-26 08:26:44 | [master][i]Terminating on request
2019-06-26 08:26:44 | [reader][i]Terminating on request
2019-06-26 08:26:45 | [main][i]Terminating worker threads
2019-06-26 08:26:45 | [feed][n]busy
2019-06-26 08:26:45 | [feed][n]disconnected
2019-06-26 08:26:45 | [feed][x]Feeding thread terminated

so, eh, is there simply way to check if i am streaming the data to here ?

thnxs.

Can I use Aurora Virtual Radar 3D/SSRx with Raspberry Pi3 ?

$
0
0
Hi there !
This subject might have been already opened but I did not find it, sorry if I missed it.
I was using an Aurora Virtual Radar 3D receiver (w/Icom AH-8000 antenna on roof) and Flighradar24 windows software.
However since May 2019 this configuration is no longer supported by Flightradar24.
I ordered a Raspberry and DVB-T USB/dongle to replace.
But the dongle comes with a tiny indoor antenna.
I was wondering if ...
1_ can I replace DVB-T USB dongle with Aurora Virtual Radar 3D receiver ?
If yes I guess that that I have to change [Receiver selection] in step 4.1 of Raspeberry configuration with option 3 in place of option 1 ?
2_ can I keep my DVB-T USB/dongle but use my outdoor AH-8000 antenna connected to the dongle (need a MCX/SMA converter) in place of inside antenna ?

Thank you for any assistance

COMM Port for Raspberry Pi 3+ and Jetvision DVB-T dongle

$
0
0
I have Raspberry Pi3+ running and I plugged in the 'Jetvision' dongle and went to the FR24 link for activation

All was Ok until it asks for COMM PORT ? where do I find the Port data? Is it hidden away somewhere, can someone advise please,

Thanks

Can I get just the image from the 1090 shown?

$
0
0
After having a lot of problems with things just crashing, I tried different approaches, and currently I'm using this setup:
https://forum.flightradar24.com/thre...-extra-feature
It works nicely, shows some stats and other stuff.
I would very much like to integrate the map showing from the 1090dump to my Home Assistant, but I'm unsure of how to do that.
Is there an URL for the map I can use for an iframe?
It would be nice if I could get the map shown with one URL, and the planelist shown with another URL, but I know that is too much to expect.
So just the simple image would be great, then I'll set up a nginx proxy, so it will work through the Home Assistant even remotely.

is there a way to feed audio to flightradar24 (like RB24) ?

$
0
0
and if yes, is there a good air band filter ?

Flightaware Flight Stick pro

$
0
0
I have an 'old' antenna that I was given with FR24 along with a SBS-box back in the days when the number of feeders were equal wih the number of states .. or something like that. ;)

At some point it probably got a lightning strike and wouldn't see any planes anymore. Being on top of the roof and me having fear of heights, I just left it sitting idle after making sure there wasn't a connection problem. Until the Windows feed was discontinued, I was feeding using a table antenna sitting in my office window.

As I started tinkering with RPI and alternative feeds, I decided to play with the old antenna again. I hooked it up to a RPI and a dongle and started receiving some traffic around the house, which was way better than the SBS3-box did. Range was 20-25nm max, though. I then hooked up my Fliightaware Flight Stick Pro (the blue one) and boom .. the number of hits immediatly skyrockeded and the range increased to over 60nm. Which must be pretty darn good for a 'dead' antenna.
Far off the 250nm I used to get though ... but that's not the stick's fault.

https://flightaware.com/adsb/prostick/

Just thought I'd throw it in here for those in the market for a new dongle. It's not expensive either.

N131PR quarter mile parallel lines flight pattern

$
0
0
last night i was outside and noticed a low, slow flying aircraft on a flight pattern that didn't look familiar. it seemed to be going back and forth in the same line across the sky. checked flightradar and it's a dc3 at about 10k puttering along at 150mph. flight path was a series of parallel lines spaced about a quarter to half a mile apart. you can check the flight here: flightradar24.com/data/aircraft/n131pr#2114f7d6

i figure this is some kind of survey, i was wondering if anyone had any ideas what it could be.

RASPBERRY PI DEBIAN Buster will not connect to planeplotter

$
0
0
I can dump1090m on other computers on my home network also feeding piaware,radarbox24and fr24 , adbs exch no problems feeding but can not connect planeplotter to receive data. Anyone else having a problem?

Distance n/s dump1090

$
0
0
Again I am trying to learn more and more.
In my dump1090 I can not see the distance from site.

Screenshot 2019-06-30 at 16.31.46.png

I searched the forum and found this thread: https://forum.flightradar24.com/thre...-not-available. In # 6 it is suggested that I add my long/lat in the settings. But I cannot find where to add those.
I am using dump1090-fa

Screenshot 2019-06-30 at 16.35.26.jpg

probably something rather easy to do, but trying to sind a way to do so for about a day.

Thanks for the help, as always:(

Access the realtime API

$
0
0
Hello,
How can i access the API to get realtime data for my application.
It seem that there are not many documents from official website.

Pi No Boot - Kernel panic - not syncing: No working init found

$
0
0
My Pi froze or stuck in the middle of the night last night.

When I was able to investigate, I found the Pi stuck with the above message.

Did my SD card corrupt?

This build has only been running since June 20th. If the SD card corrupted this fast what can I do to prevent this from happening again? This setup is pretty time consuming and complex and I do not look forward to repeating it over and over if I can avoid it.

IMG_3767.jpg

Thanks.
Attached Images

Boeing 777F Freighter fleet.

$
0
0
I have not been able to crack code on how to filter for all Boeing 777F (Freighter fleet).
Any help is appreciated
bill
Viewing all 5745 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>